DS-CH800 Online Chlorophyll Analyzer
Contact Info
- Add:西安市高新区锦业二路逸翠尚府北区8号楼1单元1701, Zip: 710000
- Contact: 魏经理
- Tel:15686405979
- Email:1528126689@qq.com
Other Products
Measurement Principle
The chlorophyll sensor utilizes the characteristic that chlorophyll A has absorption and emission peaks in the spectrum. It emits monochromatic light of a specific wavelength into the water, and chlorophyll A in the water absorbs the energy of this monochromatic light, releasing monochromatic light of another wavelength. The light intensity emitted by chlorophyll A is proportional to the content of chlorophyll A in the water.
Features
Ø Measures target parameters based on pigment fluorescence, enabling identification before potential algal blooms cause impact;
Ø No extraction or other processing required, rapid detection, avoiding the effects of leaving water samples standing;
Ø Digital sensor with strong anti-interference capability and long transmission distance;
Ø Standard digital signal output, enabling integration and networking with other devices without a transmitter;
Ø Easy and quick on-site installation of the sensor, plug-and-play;
Ø Simple to use, reliable results, interface operation instructions reduce operational errors;
Ø Equipped with a visual alarm system providing important warning functions;
Ø Controller supports wall mounting/panel mounting/clamp mounting;
Ø Reverse connection protection for sensor power supply positive and negative poles;
Ø Incorrect power connection protection for sensor RS485 A/B terminals.
Typical Applications
Ø Online monitoring of chlorophyll at water plant inlets, drinking water sources, aquaculture, etc.;
Ø Online monitoring of chlorophyll in various water bodies such as surface water, landscape water, seawater, etc. R2=0.999
Sensor Technical Parameters:
Measurement Range | 0-500 ug/L |
Measurement Accuracy | ±5% of the signal level corresponding to 1ppb Rhodamine B dye |
Repeatability | ±3% |
Resolution | 0.01ug/L |
Pressure Range | ≤0.4Mpa |
Calibration | Offset calibration, slope calibration |
Condition Requirements | Chlorophyll distribution in water is very uneven, multi-point monitoring is recommended; water turbidity below 50NTU. |
Main Materials of Sensor | Body: SUS316L + PVC (standard version), titanium alloy (seawater version); Upper and lower covers: POM; Cable: PUR |
Storage Temperature | -15 to 50℃ |
Operating Temperature | 0 to 45℃ (non-freezing) |
Dimensions | Sensor: diameter 30mm * length 223mm |
Weight | 0.55Kg |
Protection Rating | IP68/NEMA6P |
Cable Length | Standard 10-meter cable, extendable to 100 meters |
DS-115T Controller Technical Parameters:
Display Output | 128*64 graphic dot matrix LCD with strong LED backlight, operable under direct sunlight |
Power Supply | AC power supply: 85-500VAC (50/60HZ); DC power supply: 9~36VDC |
Main Materials | PA66+GF25+FR (upper cover); Powder-coated aluminum alloy (lower shell) |
Output | Three channels of 4-20mA |
Relay | Three relays, programmatically set response parameters and values |
Digital Communication | Equipped with MODBUS RS485 communication function, enabling real-time transmission of measured values |
Storage Temperature | -20 to 70℃ |
Operating Temperature | -15 to 60℃ |
Waterproof Rating | IP65/NEMA4X |
Dimensions | 145mm*125mm*162mm (L*W*H) |
Weight | 1.35KG |
| Industry Category | Measurement-Analysis-Instruments |
|---|---|
| Product Category | |
| Brand: | 西安东升 |
| Spec: | DS-CH800 |
| Stock: | |
| Origin: | China / Shaanxi / Xianshi |
