Integrated Monitoring System for Power Distribution Cable Joints

Integrated Monitoring System for Distribution Cable Joints

Model: DX-PDS100-JT

I. Product Overview

Distribution network cable intermediate joints are weak links in cable operation, often leading to overheating and fire accidents due to overload, poor contact, and other reasons. The Dingxin Smart Distribution Cable Joint Integrated Monitoring System is primarily used for condition monitoring and fault diagnosis of distribution network cable joints. It couples partial discharge pulse current signals through intelligent capacitive coupling sensors installed near the cable joints. The cloud server analyzes, calculates, and stores the partial discharge data, displaying it on the software monitoring platform.

II. Main Functions

1.Integrates multiple monitoring functions such as temperature monitoring, vibration monitoring, and water immersion monitoring, enabling comprehensive monitoring of cable joint operating conditions;

2.Adopts low-power design with timed data collection and periodic unified transmission. When monitoring data exceeds set thresholds or environmental conditions are abnormal, the device actively sends alarm information to the user end;

3.Utilizes acoustic microphone array ultrasonic partial discharge detection technology and electromagnetic wave partial discharge detection technology, achieving full coverage within a 5-10 meter detection range;

4.Supports both AC power supply and CT power supply, supplemented by supercapacitors as backup power to ensure long-term stable operation of the device;

5.The partial discharge sensor can detect in real-time the occurrence of weak electrical discharges caused by excessive electric field strength in localized weak areas of the cable insulation layer and provide early warnings;

6.Low maintenance costs, stable and reliable operation.

III. Technical Parameters

1. Temperature monitoring range: -40 to 150°C, accuracy: ±2°C;

2. Electromagnetic wave detection frequency: 3-100MHz

3. Electromagnetic wave collection range: 0-60dbmv

4. Communication method: Full Netcom 4G wireless transmission

IV. Conclusion

The protection level of the Integrated Monitoring System for Distribution Cable Joints is not less than IP67, enabling it to operate under specific environmental conditions, including normal working atmospheric pressure of 70kPa to 106kPa and altitudes ranging from 0m to 4000m. It is suitable for scenarios such as cable trenches, cable wells, ring main units, switchgear, and branch boxes. After installation, the device should be regularly maintained and serviced to ensure its long-term stable operation.

For more information about the Integrated Monitoring System for Distribution Cable Joints, please contact Ms. Feng of Dingxin Smart Technology at 1/8/9/2/3/8/2/5/1/1/6