ECR Series Rotary Pipe Cutter Tube Cutting Knife

【Product Overview】

The Rotary Pipe Cutter series is a line of cold-cutting tools produced by E-work for cutting large-diameter carbon steel, stainless steel, cast iron, and ductile iron pipes. With an ultra-reasonable body design and clever structural setup, it enables faster and more labor-saving pipe cutting! The cutting blades are made of high-strength tool steel and undergo special heat treatment to balance strength and toughness, ensuring both fast cutting and long-lasting durability.

This series of pipe cutters is widely used in flammable and explosive environments, noise-prohibited areas, narrow trenches, underwater, and other conditions. It produces no sparks or debris during cutting, ensuring both construction safety and internal pipe cleanliness to prevent valve clogging. It is currently the ideal cold-cutting tool for large-diameter pipes.

【Applicable Environments】

Flammable and explosive environments, noise-prohibited areas, narrow trenches, underwater.

【Technical Advantages】

1.Equipped with a high-strength aluminum alloy force-applying long handle for lighter and more effortless operation

2.Reasonable guide frame device ensures a flat and straight cut, avoiding deviation issues

3.Quick-advance bolt design allows for easier opening and closing of the frame

4.The feed nut enables easy retraction of the blade holder, improving cutting efficiency

5.Reasonable frame design ensures sturdiness and durability. Under normal use, E-work pipe cutters can last for decades

【Product Operation】

1. Inspect the blade to ensure it is suitable for the type of pipe to be cut.

2. Ensure the bolted rod end is in the appropriate position for the pipe size to be cut. Evenly unscrew the turnbuckles until the distance between the center of the rod end eye and one end of the turnbuckle is approximately 57 mm (2 1/4 inches). Release the pins and fit the cutter snugly against the pipe. (If clearance around the pipe is extremely tight, you may need to release 2 pins.) Attach the release pins in place via the yoke section and rod end, positioning the spring-loaded guide part of the cutter over the pipe. Hand-tighten the two turnbuckles evenly until all four blade wheels contact the pipe. Tighten the turnbuckles by half a turn for every half rotation of the cutter. The turnbuckles can also be used to advance the cutter around the pipe.

3. Tighten the turnbuckles as much as possible while still being able to advance the cutter around the pipe. (If sufficient tension is provided, the handle lever can be easily tightened—about half a turn of the turnbuckle.)