Reichert friction tester

Reichert Friction Tester

Primarily used for evaluating the tribological performance of various lubricants (oils, greases, water-based lubricants) and cutting fluids: measurement of lubricant film thickness and shape under point contact; study of film thickness variations with load, speed, temperature, etc.; noise testing.

Product Introduction

The Ducom Reichert tester consists of a firmly fixed test roller pressed via a lever system (100 to 500 N) against a rotating friction wheel immersed one-third in the test fluid. The drive motor and wheel rotate together at the same speed (0.25 to 2.50 m/s). Test temperature can vary from ambient to 120°C.

With traditional equipment, the tester is typically shut down when a significant reduction in noise is observed. This requires skilled and experienced operators to perform tests accurately, but observed test results often vary. This issue was addressed by Ducom through the integration of instrumentation to monitor noise levels, thereby reducing dependence on the operator.

• Formation and load-bearing capacity of lubricating films between two test surfaces.

• Rapid evaluation and ranking of products during development/formulation stages.

• Extreme Pressure (EP) and Anti-Wear (WP) properties of lubricating oils and greases.

• Additive consumption studies and lubricant selection in the metalworking industry.

• Determination of lubricant quality through routine sampling.

• Efficiency of additives in lubricating oils in terms of friction coefficient and wear.

Product Features

lIntegration of the "Noise Detection Module" with software reduces operator dependency, variance in observed test results, and standardizes based on threshold noise levels.

lAutomatic shutdown when the set noise threshold is exceeded.

lOptical microscope and Scar View software included for wear scar measurement in high-throughput analysis.

lMultiple optional components, such as wear and friction measurement modules, for rapid evaluation of additive and lubricant responses during product formulation.

lComputer-controlled operation, including software license.

lMOOHA Digital Lab Assistant with robust features to help maintain your tester in good health and ensure test data is secure and easily accessible. Its automatic recording and reporting functions prevent data tampering.

lAutomatic wear scar prediction machine learning algorithm.

Technical Parameters

Reichert Friction Tester

Primarily used for evaluating the tribological performance of various lubricants (oils, greases, water-based lubricants) and cutting fluids: measurement of lubricant film thickness and shape under point contact; study of film thickness variations with load, speed, temperature, etc.; noise testing.

Product Introduction

The Ducom Reichert tester is a benchtop tribometer device used to determine the load-bearing capacity of lubricants and cutting fluids. It detects the formation of lubricant films by monitoring a decrease in noise levels, thereby assessing the load capacity and wear conditions of lubricating oils or cutting fluids. The Ducom Reichert tester consists of a firmly fixed test roller pressed via a lever system (100 to 500 N) against a rotating friction wheel immersed one-third in the test fluid. The drive motor and wheel rotate together at the same speed (0.25 to 2.50 m/s). Test temperature can vary from ambient to 120°C.

With traditional equipment, the tester is typically shut down when a significant reduction in noise is observed. This requires skilled and experienced operators to perform tests accurately, but observed test results often vary. This issue was addressed by Ducom through the integration of instrumentation to monitor noise levels, thereby reducing dependence on the operator.

Applications

• Formation and load-bearing capacity of lubricating films between two test surfaces.

• Rapid evaluation and ranking of products during development/formulation stages.

• Extreme Pressure (EP) and Anti-Wear (WP) properties of lubricating oils and greases.

• Additive consumption studies and lubricant selection in the metalworking industry.

• Determination of lubricant quality through routine sampling.

• Efficiency of additives in lubricating oils in terms of friction coefficient and wear.

Product Features

Integration of the "Noise Detection Module" with software reduces operator dependency, variance in observed test results, and standardizes based on threshold noise levels.

Automatic shutdown when the set noise threshold is exceeded.

Optical microscope and Scar View software included for wear scar measurement in high-throughput analysis.

Multiple optional components, such as wear and friction measurement modules, for rapid evaluation of additive and lubricant responses during product formulation.

Computer-controlled operation, including software license.

MOOHA Digital Lab Assistant with robust features to help maintain your tester in good health and ensure test data is secure and easily accessible. Its automatic recording and reporting functions prevent data tampering.

Automatic wear scar prediction machine learning algorithm.

Technical Parameters

Reichert, Cutting Fluid Tester, Lubricant Friction Tester, Gear Oil Friction Tester, Lubricating Oil Friction Tester

For more details, please call: 4000666226
Website: w w w .f a m o u s e t.com