Carbon Steel Cutting Oxygen Generator

Scope of Application for Metal Cutting Industrial Oxygen Generators

Metal cutting industrial oxygen generators are primarily used for cutting carbon steel. The gases required for carbon steel cutting are oxygen and acetylene, as oxygen supports combustion during the cutting process, while acetylene provides a high-temperature flame. When these two gases are mixed, the resulting high-temperature flame enables rapid cutting of steel.

Role of Oxygen Produced by Metal Cutting Industrial Oxygen Generators

The primary role of oxygen is to support combustion during the cutting process. When cutting carbon steel, acetylene and oxygen are first mixed and ignited to create a high-temperature flame that cuts through the surface of the carbon steel. Oxygen acts as a catalyst in the combustion process, not only supplying fuel but also enhancing the combustion efficiency of acetylene. Additionally, during the combustion of the carbon steel surface, oxygen helps expel oxides from the surface and maintains a clean weld seam.

Acetylene, on the other hand, provides a high-temperature flame that burns the oxygen within the pipeline, thereby supplying sufficient heat. Moreover, the darker flame color of acetylene makes it easier to observe, allowing for better control over the cutting depth.

Precautions for Metal Cutting Industrial Oxygen Generators

When using oxygen and acetylene for carbon steel cutting, the following precautions should be taken:

1. Use gas cylinders produced by reputable manufacturers and regularly inspect them for leaks;

2. When operating the cutting machine, adjust the oxygen and acetylene valves separately to ensure the correct gas mixture ratio;

3. During the cutting process, pay attention to the emission of smoke and exhaust gases, as well as the ventilation of the working environment, to avoid the production of toxic gases such as carbon dioxide.

Summary

The gases required for carbon steel cutting are oxygen and acetylene. The high-temperature flame formed by their mixture enables rapid cutting of steel. Safety precautions must be observed during cutting, including the use of appropriate gas cylinders and cutting machines, as well as ensuring proper ventilation to achieve optimal cutting results and safety.