Field Steel Pipe Carbon Steel Rebar Cutting Nitrogen Generator

Introduction to Oxygen Generators for Field Cutting

Oxygen produced by industrial oxygen generators assists combustion to increase heat, thereby improving cutting thickness. With low cost, it is mainly used for cutting carbon steel, field steel pipes, and steel plates. Generally, small portable oxygen generators can meet the corresponding requirements.

Application Scope of Oxygen Generators for Field Cutting

Industrial oxygen generators for metal cutting are primarily suitable for cutting carbon steel. The gases required for carbon steel cutting are oxygen and acetylene, as oxygen supports combustion during the cutting process, while acetylene provides a high-temperature flame. The high-temperature flame generated by mixing the two can quickly cut through steel.

Role of Oxygen Produced by Field Cutting Oxygen Generators

The main function of oxygen is to support combustion during the cutting process. When cutting carbon steel, acetylene and oxygen are first mixed and ignited to create a high-temperature flame that cuts through the surface of the carbon steel. Oxygen acts as a catalyst in the combustion process, not only providing fuel but also enhancing the combustion effect of acetylene. At the same time, during the combustion of the carbon steel surface, oxygen helps expel oxides from the surface and maintains a clean weld.

Acetylene, on the other hand, provides a high-temperature flame that burns the oxygen in the pipeline, thereby supplying sufficient heat. Additionally, the darker flame color of acetylene makes it easier to observe, allowing for better control of the cutting depth.

Precautions for Field Cutting Oxygen Generators

When using oxygen and acetylene for carbon steel cutting, the following precautions should be taken:

1. Use gas cylinders produced by正规 manufacturers and regularly check for leaks;

2. When operating the cutting machine, adjust the oxygen and acetylene valves separately to ensure the correct gas mixing ratio;

3. During the cutting process, pay attention to the emission of smoke and exhaust gases, as well as the ventilation of the working environment, to avoid the production of toxic gases such as carbon dioxide.

Summary

The gases required for carbon steel cutting are oxygen and acetylene. The high-temperature flame formed by mixing the two enables quick cutting of steel. Safety precautions must be observed during cutting, including the use of appropriate gas cylinders and cutting machines, as well as ensuring proper ventilation to achieve optimal cutting results and safety.