Water-based paint - Water-based paint coating

Crown brand water-based paints come in a variety of colors and offer excellent stability; Sichuan water-based paints - supplied by a water-based paint and coating factory in Chengdu, Sichuan; Manager Sun: 152◇0825◇6966; Koguan water-based paints and coatings use water as a diluent and can be applied to surfaces such as steel, mechanical equipment, and instruments, with multiple color options available. Water-based paints boast excellent performance, simple application methods, and comply with current environmental standards, making them widely applicable.

Water-based paint is a new type of coating that can replace traditional paints and is suitable for industrial applications. Products like water-based inorganic zinc-rich primer, water-based epoxy anti-rust primer, and water-based acrylic paint have relatively mature manufacturing and application processes.

Advantages of water-based steel structure paint products sold by Crown Paint Factory:

1. Water-based steel structure paint dries quickly at room temperature and has strong adhesion of the paint film.

2. As the name suggests, water-based steel structure paint offers excellent anti-corrosion performance, with saltwater resistance exceeding ninety-six hours.

3. It has good application properties and can be applied by brushing, dipping, spraying, and flow coating, among other methods. Additionally, it has excellent leveling properties, resulting in a smooth and fine paint film.

4. During the application process, tools can be cleaned with tap water.

5. Water-based steel structure paint can be used for the protective coating of various motors, electrical appliances, instruments, mechanical equipment, grain and oil machinery, and metal products.

Water-based paint has a wide range of applications: interior and exterior walls of buildings, concrete cement surfaces, steel pipes, steel frames, steel structures, and other fields.

Application Instructions:

Use air spraying to achieve a uniform and good paint film. Brushing and rolling methods can also be used for application.

Before using the product, stir thoroughly to prevent local color differences. Allow at least 2 hours between coats; there is no requirement for longer intervals.

During application, if viscosity reduction is needed, add an appropriate amount of clean water for dilution. Do not add excessive water; the amount of water added should be less than 10%. When diluting, follow the principle of adding small amounts multiple times.

The application temperature should be ≥5°C, and relative humidity should be ≤85%. For special application environment requirements, such as temperatures below 5°C or high humidity environments above 85%, contact the manufacturer for custom product formulation according to specific conditions.

Some article content is excerpted from the internet. If there is any discomfort, please contact us to inform, and we will handle it as soon as possible. Thank you.