Q235D coiled steel plate compared to European standards.

Q235D steel plate is a carbon structural steel defined by the Chinese National Standard (GB), known for its excellent strength, toughness, and weldability. It is widely used in construction, bridges, ships, automobiles, and other fields. According to its chemical composition and mechanical properties, the carbon content of Q235D steel plate does not exceed 0.17%, manganese content does not exceed 1.4%, silicon content does not exceed 0.35%, phosphorus content does not exceed 0.035%, and sulfur content does not exceed 0.035%. These strict controls on composition ensure the quality and performance of Q235D steel plate.

In the European Standard (EN), the material corresponding to Q235D steel plate is mainly S235JR. S235JR is a non-alloy structural steel specified in EN 10025-2 and is one of the most common structural steel materials. The chemical composition of S235JR is similar to that of Q235D, but there may be slight differences in the content of certain elements. For example, the carbon content of S235JR is typically below 0.22%, manganese content below 1.65%, and phosphorus and sulfur contents are also subject to certain limits.

In terms of mechanical properties, the yield strength and tensile strength of S235JR are comparable to those of Q235D, but the elongation and impact properties of S235JR may vary depending on thickness and usage conditions. Additionally, S235JR requires certain impact tests to ensure its performance under low-temperature conditions.

Overall, Q235D steel plate and S235JR have high similarities in chemical composition and mechanical properties and can be considered equivalent materials under different standards. However, in specific engineering applications, factors such as processability, weldability, and corrosion resistance must be considered based on actual design requirements and usage environments to make appropriate selections and substitutions. If Q235D steel plate is to be used in European projects, it is recommended to consult with material suppliers or professionals to ensure the material meets relevant standards and specifications.