Drawer-type mold rack

Huizhou Drawer-type Mold Rack Huizhou Mold Placement Rack Huizhou Mold Storage Rack Huizhou Fully Open Mold Rack Huizhou Drawer-type Mold Rack Standard Three-Bay Four-Tier Mold Rack Specifications: H2000*D615*L3100 Mold Rack Main Configuration:

1. Columns (H2000*D100*L600) 4 pcs Material: 10# channel steel + 25*25 square tube welded
2. Shelves (H60*D615*L875) 12 pcs Material: 4mm slide groove + 50*30 flat bar + 1.75mm cold-rolled plate welded
3. Fixed Frame (H50*D600*L890) Material: 50*50 angle iron
4. Slide Grooves (H60*D40*L615) 24 pcs, divided into left and right Material: 4mm cold-rolled plate processed into U-shape
5. Screw Rods (L940*16mm round) 6 pcs
Other configurations will not be introduced one by one
II Mold Rack Installation:
1 Connect two columns from below using two screw rods
2 Install the fixed frame (between the two columns at the top)
3 Install the shelves (start from the bottom layer to prevent excessive width or narrowness between the two columns; adjust the bottom layer to the appropriate position before installing upwards)
4. For adding a second bay, add one column; the method is the same as above (regardless of the number of bays added)
5. After the entire set is assembled, adjust, tighten the screws, and test each shelf to ensure smooth operation
III Mold Rack Usage
1 When pulling out a shelf, first pull down the safety pin at the bottom of the left slide groove, then the shelf can be pulled out
2 When stacking items, start from the bottom layer. After placing an item on one shelf, push the shelf back in before pulling out the next shelf for operation

Mold Rack Features:
a. Safe and reliable: Equipped with back tie rods, reinforced top fixed layer, and additional positioning safety devices for secure use;
b. Easy operation: Uses bearing guide rail combination for smooth sliding;
c. Space-saving: Occupies only 1.8 square meters, capable of storing dozens of small and medium-sized molds;
d. Simple structure: All components are modular, easy to disassemble, transport, and assemble, with high storage density.
e. Load per tier: Medium type, 500-1000kg per tier;
II. 1. Heavy-duty fully open specifications: 1. Three-bay four-tier, load capacity 1000-3000kg per tier; 2. H2400*D1100*L3400m
2. Drawers can be pulled out 95%
3. Columns made of 10# channel steel, shelf supports made of 50*50 angle iron, shelves made of 4mm iron plate, slide grooves made of 4730
4. Our company adheres to the principle of "quality first, reputation above all," sincerely welcoming customers to contact us for orders and jointly develop Guangdong mold racks, Guangzhou mold racks
Standard Mold Rack:
1. Three-bay four-tier, load capacity 800-1000kg per tier, overhead crane load capacity 800kg
Mold Rack Advantages:
Advantages:
1. Modular structure, easy transportation, simple and quick assembly
2. Adjustable number of tiers, maximum load capacity up to 1000kg per tier
3. Dual mechanical self-locking protection
4. Customizable dimensions
Mold Rack Mold Shelf Fully Open Mold Rack Heavy-duty Mold Rack Drawer-type Mold Rack Guangzhou Mold Rack Manufacturer
Products are widely used in factories, institutions, logistics, and various other fields. The company is based on quality and integrity, trusted by a wide range of customers. Manufacturer
If you have any questions, feel free to contact us. If you are unsure about the specifications, contact us. If you have needs, definitely contact us, as we can help you, bring aesthetic space, and more wealth to your company
5. Guangzhou Lianchuang Machinery Equipment Co., Ltd.
Manufacturer Order Hotline: 020-28973197 13073095732
Contact: Mr. Zheng QQ: 490608638

Huizhou Mold Rack Huizhou Mold Storage Rack Huizhou Mold Placement Rack