GDS-5F Chronometer Daily Rate Calibrator for Watch Standard Establishment

Electronic Stopwatch Daily Error Calibrator GDS-5F

Product Introduction

The GDS-5F Electronic Stopwatch Daily Error Calibrator is suitable for precision measurement of clock circuits in electronic products using a 32768Hz crystal oscillator, such as smart meters, computer motherboards, thermostats, timers, electronic scales, and timing functions on electronic cash registers. The calibrator is equipped with an RS232 interface for connection to a PC, allowing real-time measurement data to be sent to the host computer for correcting clock errors in electric meters. It also comes with a 1.0-meter probe to accommodate measurements on larger circuit boards.

Product Features

1.        Features an ultra-sensitive sensor for enhanced reception sensitivity;

2.        Measures clocks using a non-contact method, while second pulses are connected to the device via contact;

3.        Utilizes a brushed oxidation panel for an elegant and stylish appearance;

4.        Built-in fast processor and TCXO (Temperature Compensated Crystal Oscillator);

5.        Indicates the strength of the measured signal with a 16-level indicator for intuitive use;

6.        Allows setting of upper and lower limit values, with automatic alarm when exceeded;

7.        Human-machine interaction uses a rotary encoder for convenient operation;

8.        Accuracy better than 0.03s/d