Power Network Two-in-One Surge Protector
Price:Negotiable
Other Products
Description
Additional Information
Network Surge Protector Manual
Scope of Application
The dedicated surveillance surge protector is used for surge protection of power/network/2-in-1 surveillance transmission devices with RJ45 terminal connections.
Application Diagram
Technical Parameters
Installation and Maintenance
1. The series of dedicated surveillance surge protectors are installed directly in front of the protected equipment (or system), and should be placed as close as possible to the protected device during installation.
2. The surge protector can be fixed to a wall or inside a protective cover using screws or 35mm rails, with signal lines connected in series.
3. "IN" connects to the lead wire end, "OUT" connects to the protected equipment (or system) end. During installation, the two ends of the wiring must be laid separately and not bundled together to prevent secondary induction.
4. The surge protector should be grounded using the shortest possible wire.
5. Under normal operating conditions, this surge protector does not require long-term maintenance, only routine system maintenance. If signal transmission issues occur during use and normal transmission resumes after replacing the surge protector, it indicates that the surge protector is damaged and requires repair or replacement.
Model
GUN-2/220
Network
Power
Un
5V
220V
Uc
8V
275V
In
5kA
5kA
Imax
10kA
10kA
Up
≤15V
≤900V
Response Time
≤1ns
≤25ns
Transmission Rate
100Mbps
/
Insertion Loss
≤0.5dB
Operating Temperature
-25℃～75℃
Terminal Type
RJ45
Screw Terminal
Wiring Capacity
1-2.5mm²
Protection Level
IP20
Dimensions
110*62*36(Mounting Hole Distance98)mm
| Industry Category | Electrical-Equipment-Supplies |
|---|---|
| Product Category | |
| Brand: | 高尔德 |
| Spec: | GUN-2/220 |
| Stock: | 10000 |
| Manufacturer: | |
| Origin: | China / Shandong / Jinanshi |
