120L-1 Trash Can

1. Rated capacity: 120 liters (5.8KG), the deviation between the actual capacity and the rated capacity should be within 0~5% positive deviation. Dimensions: Length 560mm * Width 480mm ±20 * Height 920mm (without lid), height with lid: 940mm. Thickness requirements: Lid ≥ 3.2mm, bottom ≥ 4.2mm, wall thickness ≥ 4.0mm. Barrel body ≥ 5.8kg, lid ≥ 0.6kg, hollow shaft ≥ 0.25kg, wheels ≥ 1.6kg; total weight with lid and axle ≥ 8.25KG. Material: New high-density polyethylene (HDPE).

2. Product requirements:

(1) Appearance performance: Smooth and flat surface, free from bubbles, ripples, impurities, pinholes, black spots, or cracks. The color of the plastic garbage bin body and lid should be consistent for the same batch, and there should be no obvious deformation at the closing parts.

(2) The product is made of over 95% new high-density polyethylene (HDPE) material, formed by one-time injection molding, with high-quality reinforcement, UV resistance agents, and color pigments to ensure bright colors and long-lasting fade resistance. The aging resistance of the barrel should comply with GB/T 16422.2 requirements, with sufficient mechanical strength and good impact toughness.

(3) The barrel body features a longitudinal concave design on all four sides, enhancing toughness, load-bearing capacity, and stability. Reinforced ribs are provided at the barrel opening and both sides.

(4) The barrel handle is connected to the body with 8 reinforced ribs, making the garbage bin handle more robust and extending the product's lifespan.

(5) The bottom can be fitted with 34 wear-resistant nails, featuring a mesh design around the perimeter and a concave-convex shape in the center.

(6) The recessed dimensions on both sides of the barrel body below the reinforced ribs: 190mm*740mm. The front and rear recesses extend from top to bottom, with recessed dimensions below the reinforced ribs: 190mm*730mm.

(7) There are 11 reinforced ribs around the barrel body.

(8) Lid

(9) Connection between rubber wheels and bottom axle: Direct insertion with anti-retreat and anti-theft design. The axle is made of galvanized steel and treated for corrosion resistance; the inner ring of the rubber wheel is polyethylene with a built-in steel sleeve, and the outer ring is rubber.

(10) Product compliance standard: "China Urban Construction Industry Standard—General Technical Conditions for Plastic Garbage Bins," standard number CJ/T 280—2008.