Water-based Epoxy Universal Putty WG-901

Product Features
· Water-based and environmentally friendly, pollution-free.
· Resistant to penetration, cold, heat, and salt/alkali erosion.
· Reduces acid mist and salt mist corrosion.
· Excellent wear resistance; provides anti-corrosion and anti-slip protection for steel bridge surfaces.
· Excellent bonding performance for various materials such as steel, aluminum, wood, stone, ceramic tiles, and concrete.
· Suitable for coating building facades and tops, especially for waterproofing on the backwater side.

Product Applications
Used for anti-corrosion, waterproofing, and anti-permeability in concrete.
Bonding and reinforcement for steel and concrete.

Application Sites
Suitable for bonding, anti-corrosion, waterproofing, and reinforcement in tunnels, culverts, water conservancy and hydropower projects, underground parking lots, storage tanks, sewage pools, coastal and river embankments, roads and bridges, hospitals, hotels, shopping malls, kitchens, and bathrooms.

Packaging Specifications
25kg/set (A: 1kg + B: 4kg + C: 20kg)

Quality Standards (Complies with JG/T 984-2011 "Polymer Cement Waterproof Mortar")

Usage Instructions
1. Take out the three components A, B, and C.
2. Ensure the container is clean, pour components A and B into the container, and mix thoroughly.
3. Pour component C powder into the mixed A and B components, then stir thoroughly.
4. After thoroughly mixing components A, B, and C, add 1%–3% water and mix well before use. (Note: Water must be added only after components A, B, and C are thoroughly mixed.)
5. Apply using conventional troweling techniques.
6. If viscosity increases during application, add an appropriate amount of water using a manual sprayer and mix well.
7. If finishing time is too long and workability decreases, spray a small amount of water on the surface with a manual sprayer for finishing.
8. A second application can be performed after 24 hours.