Water-based epoxy anticorrosive intermediate coating

Product Features
· Water-based eco-friendly product, compliant with international standards, low VOC.
· Excellent rust resistance.
· Long-lasting corrosion protection.
· Enhances overall coating film performance.
· Outstanding mechanical and physicochemical properties.

Product Applications
Intermediate coating for water-based anticorrosive painting of steel and structural components.
Can also be used as an anticorrosive primer.
Suitable for workplaces with high safety, environmental, and anticorrosion requirements.

Application Sites
Building steel structures
Bridge steel structures
Petrochemical storage tanks
Mining equipment
Metallurgical power plant equipment

Packaging Specifications
Component A: 16kg tinplate bucket
Component B: 11kg plastic can

Application Instructions
Surface Preparation: The surface coated with primer must be clean and dry. Remove surface contaminants using appropriate detergents and high-pressure fresh water.
Thinner: Use deionized water or compliant tap water as thinner.
　　　　　 Thinner Dosage: Airless spraying Below 10% (by mass of original paint)
　　　　　　　　　　　 Air spraying Below 20% (by mass of original paint)
　　　　　　　　　　　 Brush application Below 20% (by mass of original paint)
　　　　　　　　　　　 Roller application Below 20% (by mass of original paint)

Application Methods: Airless spraying, air spraying, brush application, roller application (specialized)

Usage Method: Stir Component A thoroughly, add the required amount of Component B as specified, and mix well. Add an appropriate amount of thinner according to the application method, stir evenly before use. After mixing Components A and B, use within the pot life period.

Precautions
It is recommended to use the product in dry, sunny weather or under good application conditions and environment.
Application temperature above 10°C, relative humidity below 70%, air velocity above 0.5m/s.
Do not use excessive thinner; over-dilution may compromise paint stability and affect performance.
Use the mixed paint within the pot life corresponding to the temperature; quality assurance decreases after expiration.
After application of water-based paint under ambient drying conditions, ensure sufficient air-drying time. Avoid exposure to water, vapor, mist, etc., during this period, as it may affect quality and performance.