Babbitt Bearing Lining Casting and Processing for Ball Mill

Babbitt alloy is an alloy composed of metals such as aluminum, copper, nickel, and iron. Its name is derived from the British metallurgist W.H. Barlow.

Babbitt alloy possesses excellent mechanical properties and corrosion resistance, making it widely used in fields such as aerospace, automotive manufacturing, and electronic equipment. It features high strength, high hardness, wear resistance, corrosion resistance, and also exhibits good machinability and weldability.

The composition of Babbitt alloy can be adjusted according to specific application requirements to meet different performance demands. For example, adding appropriate amounts of silicon and magnesium can enhance the alloy's strength and heat resistance, while adding manganese and zirconium can improve its corrosion resistance.

Overall, Babbitt alloy is an important engineering material with broad application prospects.



Babbitt alloy, bearing alloy, Babbitt alloy bearings, thrust pads, bushings, and liners production—we sincerely look forward to collaborating with you to achieve brilliance. Below, I will briefly discuss some knowledge about the pouring of Babbitt alloy bearings for consumers: 1. Cleaning of alloy bearings: Place the bearings in a 10%-15% cleaning solution 1 to remove rust, then place them in hot water at 80 degrees Celsius to eliminate remaining dirt. After washing, place the bearings in hot water at 70 degrees Celsius to remove any remaining impurities. After cleaning, avoid touching the inner surface of the bearings with your hands. Sometimes, due to prolonged storage after removing old alloy, an oxide layer may form on the surface. Before tinning, perform a 3-minute weak corrosion in cleaning solution 1, immediately followed by a 2-minute neutralization in cleaning solution 2, and then rinse with hot water. 2. The adhesion strength of tin to the bearings is better than that of Babbitt alloy. Tinning helps the Babbitt alloy adhere more firmly. The materials used for tinning are tin or tin alloys, along with a flux. The flux removes surface oxides and grease, ensuring a strong bond. Tinning methods include the wiping method and the dipping method. 3. Removing contaminants: Use a blowtorch flame or heating furnace to heat the back of the bearings to remove old Babbitt alloy. Carefully clean the melted Babbitt alloy from the bearings with a steel brush, removing dirt, rust, and traces of Babbitt alloy. Pay special attention to cleaning the oil grooves and dovetail slots. After cleaning, tinning is performed as a base layer before pouring the Babbitt alloy solution...