Fixed clamp for laminated board

Product Introduction

1. The device consists of I-shaped aluminum alloy rails, end anti-drop devices, turners, connecting fittings, fall arresters, and fixed fittings. All components undergo anti-corrosion treatment to ensure a design lifespan equivalent to that of the tower.

2. The device is suitable for all types of towers and can effectively lock at any part of the tower where the rail is installed.

3. The device adopts a built-in rail structure, which is dustproof, anti-fouling, and easy to de-ice; it is simple and lightweight, with each meter of rail weighing no more than 1.3kg, a surface roughness of no more than 6.3, and a cross-sectional structural deviation of less than 0.5mm.

4. The device can carry a total mass of 100kg, including the operator and carried items. When a tower climber wears a safety harness with a buffer pack, the impact force on the person in the event of a fall is less than 6kN, and the device does not suffer any structural damage.

5. The rail can withstand a static load of 15kN without any structural damage.
    
6. The fall arrester is lightweight (0.6kg) with a design service life of 5 years. It can lock unidirectionally when passing through vertical, inclined, and curved rails, and slide freely bidirectionally on horizontal rails. It does not lose its locking function upon impact and can resume normal operation after unlocking.

7. The fall arrester can withstand a static load of no less than 15kN and an impact load of no less than 100kg. When using the fall arrester, the fall distance is short (no more than 1.0m), the locking distance of the fall arrester is no more than 0.1m, and it features inertia-free locking.

8. Installing or removing the fall arrester on the rail requires two manual operations. The fit clearance between the rail and the fall arrester is tight (no more than 2mm), and the surface of the fall arrester has a clear usage (arrow) direction.

Product Features: Moderately hard lightweight aluminum alloy rail, suitable for all tower types, vertical and horizontal directions, 360-degree smooth transition, providing fall protection for personnel throughout the entire tower climbing process.