Plastic Corrugated Pipe D75, Plastic Corrugated Pipe for Precast Beams, YM15-9 Hole Anchor, Contact Me for Processing

Plastic Corrugated Pipe D75 Precast Beam Plastic Corrugated Pipe YM15-9 Hole Anchor Contact Me for Processing

Plastic Corrugated Pipe for Prestressed Concrete Beams

The plastic corrugated pipe (typically made of HDPE or PP) used in prestressed concrete beams is a duct-forming material for post-tensioned prestressed structures, primarily used to protect prestressed steel strands or reinforcement bars and ensure grouting compactness. Below are its key characteristics and application points:

1. Material and Characteristics

• Material: High-density polyethylene (HDPE) or polypropylene (PP), featuring corrosion resistance, good flexibility, and strong impact resistance.
• Structure: Spiral corrugated design enhances compressive strength and facilitates bending Plastic Corrugated Pipe D75 Precast Beam Plastic Corrugated Pipe YM15-9 Hole Anchor Contact Me for Processing during construction.
• Advantages:
  • Resistant to acids, alkalis, and aging, with a long service life (superior to metal corrugated pipes).
  • Low friction coefficient reduces prestress loss.
  • Good insulation properties prevent galvanic corrosion (suitable for environments with stray currents).

2. Technical Standards

• Chinese Standards:
  • "JG/T 225-2020" Plastic Corrugated Pipes for Prestressed Concrete (latest version).
  • Must meet performance requirements such as ring stiffness, local transverse load, and flexibility.
• International Standards: Such as ISO 14839 (Plastic Corrugated Pipe D75 Precast Beam Plastic Corrugated Pipe YM15-9 Hole Anchor Contact Me for Processing some countries reference ASTM or EN standards).

3. Construction Key Points

• Installation:
  • Fix according to design positions to avoid displacement during concrete pouring.
  • Use specialized sleeves for heat fusion connections to ensure sealing.
• Grouting:
  • Ensure pipes are unobstructed and free of blockages; use high-performance non-shrink cement grout.
  • Check compactness after grouting (detectable via ultrasonic or impact-echo methods).

4. Application Scenarios

• Bridge Engineering: Long-span beams, continuous beams, cantilever beams, etc.
• Building Structures: Transfer beams in high-rise buildings, long-span slabs.
• Special Environments: Corrosive environments such as coastal areas and chemical plants.

• Prestressed anchors are critical components in prestressed engineering, primarily used to anchor prestressed tendons (such as steel strands, wires, reinforcement bars) and transfer prestress to concrete structures or other load-bearing components. Below is a detailed introduction to prestressed anchors:

  1. Product Types

  Prestressed anchors are categorized based on different application scenarios and types of prestressed tendons,

  • Wedge Anchors: Suitable for steel strands, common models include YM type (round anchor), BM type (flat anchor), widely used in post-tensioned prestressed construction.
  • Button Head Anchors: Used for high-strength wires, formed by cold or hot heading to create an anchoring head.
  • Nut Anchors: Mainly used for precision-rolled threaded bars, anchored via nuts and bearing plates.
  • Compression Anchors: Fix steel strands by compressing sleeves, commonly used for connecting prestressed tendons.
  • Bonded Anchors: Such as bulb anchors, which use cement grout or epoxy resin to bond prestressed tendons.
  Plastic Corrugated Pipe D75 Precast Beam Plastic Corrugated Pipe YM15-9 Hole Anchor Contact Me for Processing

• primarily divided into the following categories: