Disposable Oxygen Tube

Product Name: Disposable Oxygen Inhalation Tube

Registration Certificate Number: Yu Xie Zhun 20182080519

Model Specifications: Adult Double-hole, Adult Single-hole, Pediatric Double-hole, Pediatric Single-hole, Newborn Double-hole, Newborn Single-hole

Product Structure: This product is made of soft polyvinyl chloride material and consists of a connector, main oxygen delivery tube, branch oxygen delivery tube, and nasal cannula.

Scope of Application: Used for direct oxygen delivery between the oxygen source and the oxygen recipient during oxygen inhalation.

[Main Ingredients] Non-toxic polyvinyl chloride material.

[Function] The product is manufactured from non-toxic polyvinyl chloride material. It consists of an oxygen delivery connector, tube connector, oxygen delivery tube, nasal oxygen delivery tube, and oxygen delivery nasal cannula.

[Specification Model] 3m double-lumen type

[Usage and Dosage] This oxygen inhalation tube is for one-time use by medical departments when administering oxygen to patients. During use, place the vent holes of the oxygen delivery nasal cannula into the nostrils, move the adjustable buckle around the ear to secure it, then connect one end of the oxygen delivery tube to the oxygen source. Open the oxygen source to begin the oxygen inhalation process.

[Precautions] 1. This product is for single use only. 2. Do not use if the packaging is damaged. 3. Use under the guidance of a doctor.

[Shelf Life] 24 months

Usage Method:

Oxygen inhalation is the most commonly used clinical treatment, and disposable oxygen inhalation tubes are necessary devices for oxygen therapy. The disposable oxygen inhalation tube consists of a main tube connected to two branch tubes, with nasal tips at the ends of the branches. During oxygen inhalation, connect one end of the main tube to the outlet of the oxygen tank or pipeline oxygen, place the nasal tips in the nostrils, and to secure the tube, wrap the two branches behind the ears and adjust the sleeves on the branches appropriately. Before starting oxygen inhalation, insert the nasal tips, open the main oxygen switch, ensure the tube is unobstructed and the oxygen flow is appropriate, then properly wear the nasal cannula.

Installation Method:

Disposable Oxygen Inhalation Tube Installation Method (Threaded Type)

1. Open the oxygen humidifier bottle cap and remove the medical sealed bottle mouth film (Figure 1 above);

2. Remove the堵盖 from the oxygen outlet of the humidifier bottle and connect the nasal oxygen tube here;

3. Rotate and connect via the bottle mouth threads to the original humidifier bottle position on the oxygen flow meter (Figure 2 above);

If the humidifier bottle cannot be properly connected to the flow meter, please contact us directly;

4. Rotate the oxygen adjustment knob to set the oxygen flow rate as prescribed by the doctor;

5. Insert the nasal oxygen tube into the patient's nostrils.

Note: Before turning on the oxygen, the堵盖 must be removed from the humidifier bottle's oxygen outlet, and the nasal oxygen tube connected; after turning on the oxygen, if no bubbles are observed in the humidifying liquid, turn off the oxygen, check if the humidifier bottle threads match the oxygen flow meter, and if not, replace with a corresponding threaded humidifier bottle.

Disposable Oxygen Inhalation Tube Installation Method (Plug-in Type)

1. Unpack and take out the product;

2. With the oxygen flow meter turned off, insert the flow meter into the equipment strip, remove the专用湿化瓶体进口密封帽, then insert the专用湿化瓶体进气口 into the flow meter's quick-connect接头 until a "click" is heard and it does not detach when pulled down slightly, indicating successful connection: remove the专用湿化瓶体出气口密封帽, turn on the oxygen and adjust to the desired flow rate for 10 seconds, then connect the nasal oxygen tube to the专用湿化瓶体出气口 to begin oxygen inhalation;

3. When卸载, ensure the flow meter is off, hold the专用湿化瓶体, and lift the quick-connect压套 to remove the product.

Precautions

1. The disposable oxygen inhalation tube is a single-use sterile product; reuse is prohibited;

2. This product is sterilized; if the outer packaging is damaged, foreign objects are inside, or the humidifier bottle is damaged, the cap is loose, or there is leakage, do not use;

3. When the humidifying liquid level drops to the upper edge of the bubble generator, replace the disposable oxygen inhalation tube promptly;

4. After opening the package, the product should be used within 4 days.

5. The常规款 is generally suitable for a flow rate of 3~4L/min. For patients requiring high-flow continuous oxygen during rescue, use our company's "CU抢救专用款".

6. The product packaging includes instructions for use; read carefully before use.

Manufacturer: Xinxiang Huakang Medical Supplies Co., Ltd.

Production Address: Development Zone, Dingluan Town, Changyuan County

Contact Phone: 0373-8066788   18238781000