Degreasing agent

Oil and Grease Remover

Ultra-Low Temperature Oil and Grease Removal King

This product utilizes German technology, replacing traditional high-temperature alkaline and medium-temperature oil removal methods. It largely avoids the use of raw materials that are difficult to clean at low temperatures and are corrosive and hazardous. It is a broad-spectrum oil and grease removal cleaner suitable for both saponifiable and non-saponifiable oils, as well as for metals and non-metals. It provides excellent treatment effects on oil stains on various steel plate surfaces at low temperatures. In industrial applications, this product offers good stability, large treatment area, low cost, no secondary oil carryover, and no environmental pollution.

I. Usage Method:

Apply manually by wiping, immersion, or spray treatment (add an appropriate amount of defoamer when using spray treatment).

II. Agents Used:

III. Material for Oil Removal Tanks or Nozzles:

Tanks can be made of thick-walled plastic plates or low-carbon steel (with internal anti-corrosion lining). Exchangers and nozzles should be made of stainless steel. Piping and pumps should also be stainless steel to reduce maintenance work.

IV. Testing Agents and Instruments:

Agents: Indicator: Phenolphthalein Titration solution: 0.1N H₂SO₄

Instruments: Pipette 10ml            Burette: 25ml acid burette            Conical flask: 25ml

V. Treatment Process:

Degreasing → Rinsing → Rinsing → Post-treatment

VI. Preparation Method for Oil Removal Working Solution (Based on 1000 Liters):

1. Fill the treatment tank to 60% capacity with water;

2. Add 50–80 kg of Degreaser SQ-CY100 type, stirring continuously until fully dissolved;

3. Add the remaining water to make up to 1000 liters.

VII. Treatment Conditions:

Free alkalinity: 12–25 pt    Temperature: Above 0°C to 60°C     Treatment time: 3–8 minutes (extend accordingly if temperature is too low or oil is too heavy).

VIII. Key Product Features:

1. This product operates at low temperatures, has short treatment time, long service life, large treatment area, and low unit cost. It is one of the most advanced room-temperature degreasers currently available domestically.

2. It has strong degreasing and oil removal capabilities, high efficiency, energy savings, low pollution, no significant skin irritation, and is safe and convenient to use.

3. It can be applied manually by wiping, immersion, or spray (a small amount of defoamer is required for spray).

IX. Replenishment and Adjustment:

1. Due to continuous use during production, the oil removal and degreasing performance of the working solution may weaken. When the pH value is below 9, replenishment is needed. Add one-third of the initial tank preparation amount to continue working. For heavy workloads, frequent replenishment is recommended. Generally, add 4–5 kg per ton of tank daily, mix well, and use. Alternatively, regularly test the free alkalinity of the working solution. If it is outside the normal working range, replenish accordingly. Generally, adding 1.7–2 kg of concentrated agent increases free alkalinity by one point.

2. Due to continuous use, sediment in the tank increases, necessitating tank cleaning. During cleaning, allow the working solution to clarify, remove the clear upper portion, discard the sediment, clean the tank thoroughly, then return the clear portion to the tank. Add water to the initial tank volume, then add the degreaser and mix well to continue working. The replenishment ratio is the same as the initial tank preparation ratio.

X. Other Matters:

Higher temperature and increased degreaser content can improve degreasing effectiveness.

XI. Packaging:

25kg/drum/bag

Contact: Wen Shan Tel: 15901396770 (Mobile)010-69808511 Fax: 010-69808511 QQ: 1549760684Product Official Account: hqtuliao6770  Visit: haiqinliwen.cn