INA slide block KWVE25BH G2V2

Dongguan Xiangdu Electromechanical Co., Ltd. includes at least one full roller slider, one guide rail, built-in end elastic scrapers, a bottom seal strip on the slider, and plastic filler pieces. The sliders and guide rails of the linear recirculating roller bearing and guide rail assembly are standard-matched to each other. Due to their identical tolerance preload, after consultation, there is a possibility of using sliders and guide rails from different groups. The linear recirculating roller bearing and guide rail assembly can achieve accelerations of up to 100 m/s², speeds of up to 180 m/min, and operating temperatures from –10 °C to +100 °C. They are applied in unlimited travel, very high load, and very high rigidity applications. These units also offer optimized noise designs that achieve X-life quality. Ball-type single guide rail system: The six-row linear recirculating ball bearing and guide rail assembly KUSE has the highest load capacity and rigidity among ball rolling element linear guides. It includes at least one full ball slider, one guide rail, built-in end elastic scrapers, a bottom seal strip on the slider, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly KUSE can withstand accelerations of up to 150 m/s², speeds of up to 300 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, very high load, and very high rigidity applications. Six-row linear recirculating ball bearing and guide rail assembly: The four-row linear recirculating ball bearing and guide rail assembly KUVE is the most versatile and extensive product range in INA guide rail systems. It includes at least one fully loaded slider, one rail, built-in elastic scrapers at the slider ends, a bottom seal strip on the slider, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly KUVE can withstand accelerations of up to 150 m/s², speeds of up to 300 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, high load, and high rigidity applications. This guide rail system also offers an optimized noise design with X-life quality. Two-row linear recirculating ball bearing and guide rail assembly: The two-row linear recirculating ball bearing and guide rail assembly is a linear system that meets economical medium load requirements. It includes at least one fully loaded slider, one rail, built-in elastic scrapers at the slider ends, a bottom seal strip on the slider, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly can withstand accelerations of up to 150 m/s², speeds of up to 180 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, medium load, good rigidity, and low friction applications. Linear guidance systems are compact, highly rigid, and have large load capacities, based on standard complete units with balls or rollers. These guidance systems can support forces in all directions—except the running direction—and torques around all axes. There are various accuracy and preload grades to meet the guidance requirements of different applications. Linear guidance systems are also part of a modular system, for example, guide rails can be combined with all sliders of the same size. This means more economical inventory, simpler installation, and easier replacement. To reduce maintenance costs, the guide rail system has built-in lubrication storage pockets. The full sealing of the slider isolates the rolling elements from contamination in the application environment. Roller-type single guide rail system: Due to the use of cylindrical rollers, the linear recirculating roller bearing and guide rail assembly RUE has high load capacity and high rigidity in INA linear guide systems. Shanghai INA Guides / INA Dongguan Foshan INA Imported Bearings Professional Spot Inventory Supply of German INA; INA-KWVES type, KWVESN type, KWVEH type sliders, TKVD type guide rails [square sliders] KWVE15S, KWVE20S, KWVE25S, KWVE30S, KWVE35S, KWVE45S, slider models, KWVE20SN, KWVE25SN, KWVE30SN, KWVE35SN, KWVE45SN, slider models, KWVE25H, KWVE30H, KWVE35H, KWVE45H, slider models, KUVE15S, KUVE20S, KUVE25S, KUVE30S, KUVE35S, KUVE45S, combination models, KUVE20SN, KUVE25SN, KUVE30SN, KUVE35SN, KUVE45SN, combination models, KUVE25H, KUVE30H, KUVE35H, KUVE45H, combination models, TKVD15, TKVD20, TKVD25, TKVD30, TKVD35, TKVD45, guide rail models, RUE-D-FE standard series flange type, grease lubrication, corrosion-resistant design RUE-D-OE standard series flange type, oil lubrication, corrosion-resistant design RUE-D-L-FE long series flange type, grease lubrication, corrosion-resistant design RUE-D-L-OE long series flange type, oil lubrication, corrosion-resistant design RUE-D-H-FE high narrow series square type, grease lubrication, corrosion-resistant design RUE-D-H-OE high narrow series square type, oil lubrication, corrosion-resistant design RUE-D-HL-FE high narrow long series square type, grease lubrication, corrosion-resistant design RUE-D-HL-OE high narrow long series square type, oil lubrication, corrosion-resistant design RUE-E full roller circulation system standard series flange type, oil or grease lubrication, corrosion-resistant design RUE-E-L full roller circulation system long series flange type, oil or grease lubrication, corrosion-resistant design RUE-E-H full roller circulation system high narrow series square type, oil or grease lubrication, corrosion-resistant design RUE-E-HL full roller circulation system high narrow long series square type, oil or grease lubrication, corrosion-resistant design RUE-E-KT-L chain guide long series flange type, oil or grease lubrication, corrosion-resistant design RUE-E-KT-HL chain guide high narrow long series square type, oil or grease lubrication, corrosion-resistant design INA (Ball Type) INA Ball Monorail Guidance Systems Features KWVE four rows; corrosion-resistant design KWVEB four rows; corrosion-resistant design KWVEBKT with square shims, four rows, corrosion-resistant design KWSE--standard series, six rows; corrosion-resistant design KWSE-L long series, six rows; corrosion-resistant design KWSE-H high narrow series, six rows; corrosion-resistant design KWSE-HL high narrow long series, six rows; corrosion-resistant design KWE standard series flange type, two rows, corrosion-resistant design KWE-H high narrow series square type, two rows, corrosion-resistant design INA (Miniature Ball Type) INA Miniature Ball Monorail Guidance Systems Features KUME-C standard, corrosion-resistant, four rows KWEM / TKDM standard, corrosion-resistant, two rows KWEM-L / TKDM long, corrosion-resistant, two rows KWEM-C / TKDM short, corrosion-resistant, two rows KWEM-W / TKDM-W wide, corrosion-resistant, two rows KWEM-WL / TKDM-W wide long, corrosion-resistant, two rows KWEM-WC / TKDM-W wide, corrosion-resistant, two rows. Products are widely used in various lathes, grinding machines, machine tools, spraying equipment, CNC machine tools, machining centers, measuring instruments, precision testers, electronics, automated machinery, textile machinery, automotive, food machinery, medical equipment, printing machinery, packaging machinery, woodworking machinery, and many other fields.