Electric Wire and Cable Tracking Resistance Tester

I. Execution Standard

The KS-30487B Wire and Cable Tracking Resistance Tester is designed for the electrical performance test of wire and cable tracking resistance as specified in the GB/T 30487.7-2007 standard.

II. Product Features

The KS-30487B Wire and Cable Tracking Resistance Tester features a cold-rolled plate with high-end spray-painted exterior casing; it utilizes the most advanced PLC control for intelligent operation; optional TFT true-color LCD; allows for upgrades to a user-friendly operation interface, truly achieving internationally comparable results.

III. Product Function

The KS-30487B Wire and Cable Tracking Resistance Tester is used to test the ability of wires and cables to withstand damage caused by surface leakage-induced tracking under specified conditions. It is suitable for research, production, and quality inspection departments of wires and cables. By outputting a certain high voltage from a high-voltage source, and under the combined action of high voltage and electrolyte, it determines whether the current at the grounded end of the sample exceeds 1A within several cycles, thereby assessing the insulation performance of solid insulating materials.

IV. Technical Parameters:

Control Method: Utilizes the most advanced PLC control for intelligent operation; employs a digital flow control system to precisely control the flow of contaminant liquid; fully automatic adjustment for accurate test voltage

Display Method: True-color LCD display (standard 7-inch Weintek 16:9 touchscreen), allowing for upgrades to a user-friendly operation interface

Data Output: At the end of the test, the device automatically determines pass or fail, generates a test report, and prints the test report

Data Acquisition: Optically isolated data acquisition for voltage and current, ensuring reliable data and anti-interference

Test Cycle: Spray cycle can be set according to experimental requirements

Button Switches: High-end metal buttons

Voltage Specifications: Input voltage AC-220V, output voltage AC-0-5KV

Electrical Capacity: 7KVA

Voltage Test Accuracy: 2%

High-Voltage Side Output Current: 1A

High-Voltage Side Output Current: 250MA, maximum voltage drop 5%

Current Measurement Accuracy: 1%

Spray Range: 1M

Nozzle Distance from Ground: 600CM

Nozzle Distance from Sample: 500CM

Spray Velocity at Sample: 3m/S

Spray Volume: 0.5mm/min

Standard Spray Cycle: Spray 10S, pause 20S

Flow Control: Equipped with a flow meter to control the flow of corrosive liquid during the experiment

Corrosive Liquid Replacement: The corrosive liquid can be recycled during the experiment; if replacement is needed, a dedicated release port allows for direct drainage

Test Alarm: Buzzer alarm when current exceeds 1A or the test time is reached

Guide Channel: The spray nozzle is parallel to the guide channel, keeping the spray nozzle at a constant 45-degree angle