Photocatalytic Parallel Reactor WP-TEC-1020SL

Basic Parameters:

Reaction Sites: 10 groups (The 11th is a blank temperature measurement point)

Reaction Container: 20mL (Round bottom, small tube diameter, thick-walled, glass reaction tube)

Applicable Volume: 1-5mL (Sealed tube, lighting), 1-10mL (Room temperature, heating, lighting)

Applicable Reactions: Stirring reaction, heating reaction, sealed tube reaction, anhydrous and oxygen-free reaction

High-Temperature Parameters:

Heating Unit: Intelligent safety heater (equipped with German IKA RCT main heater)

Temperature Control Unit: Precision intelligent probe (equipped with German IKA ETS-D5 precision probe)

Temperature Control Technology: Internal temperature control + parallel temperature control + electronic dual temperature control

Independent Temperature Zones: 1 control zone (Heating module is standard)

Heating Range: RT-220°C

Heating Efficiency: 5-8°C/min (10 x 5mL ethanol, 20-100°C)

Temperature Control Accuracy: ±0.5°C (High-temperature mode)

Parallel Accuracy: ±0.5°C (High-temperature mode)

Sealed Tube Experiment: Yes (True sealed tube, zero reflux sealed tube)

Overnight Experiment: Yes (Overnight temperature ≤120°C)

Cooling and Temperature Reduction: Yes (Requires external cooling circulation, panel-integrated float water flow meter)

Reflux Parameters: If "Reflux Module" is selected (Not configured)

Reflux Experiment: Standard condenser reflux module (enables photocatalysis under reflux)

Reflux Experiment: Yes (Reflux efficiency ≥98%, ethanol loss rate ≤2% after 48h heating reflux at 80°C)

Low-Temperature Parameters: If "Low-Temperature Module" is selected (Not configured)

Low-Temperature Experiment: Standard low-temperature module

Cooling Method: Can be connected to an external circulation chiller

Low-Temperature Range: Down to -20°C (Depends on the external circulation chiller)

Temperature Control Difference: ±1°C (Depends on the self-provided external circulation chiller)

Pressure Parameters: If "Pressure Function" is selected (Not configured)

Gas Addition Experiment: Standard pressure-resistant components (enables photocatalytic reaction under low pressure)

Gas Addition Method: Gas supplied to the system via tubing from a cylinder connected to the gas source platform

Pressure Range: Maximum gas pressure up to 10atm

Pressure Display: Adjust pressurization range via the pressure gauge at the减压器 outlet

Photocatalytic Parameters: If "Lighting Module" is selected (Configured)

Photoreactor: 20mL quartz reaction tube (Micro, small tube diameter, thick-walled, 100% light-transmitting quartz reaction tube)

Irradiation Method: Zero-distance bottom irradiation

Light Source Type: Monochromatic LED light chip (Fixed wavelength selected or customized as needed, non-traditional filtering mode)

Light Source Power: 1-10W/site

Light Source Cooling: Can be connected to external circulation cooling

Light Source Switching: Wavelength can be manually changed

Light Source Leakage: Minimal (Total reflection, zero light pollution, high utilization rate)

Light Source Lifespan: 5000 hours (Ensure cooling, prevent overheating)

Stirring Parameters: Standard "Stirring Heating"

Stirring Method: Synchronous环绕 magnetic stirring (equipped with German IKA stirring module)

Stirring Speed: 0-1500rpm (Requires corresponding stirrer)

Stirring Bar One: Yes (Olive type*L13.5mm*220°C)

Material Addition Parameters:

Suitable Materials and Viscosity: Low viscosity liquids or dispersed solids

Anhydrous and Oxygen-Free Liquid Feeding: Yes (Syringe puncture sampling)

Anhydrous and Oxygen-Free Solid Feeding: Yes (Zero-loss micro sampling under nitrogen flow protection or投放 weighing dish under nitrogen flow protection))

Portable Glove Box Feeding: Yes (Entire reaction tube can be placed in glove box)

Anhydrous and Oxygen-Free Sample Collection: Yes (Online minimally invasive sampling)

Puncture Sealing塞: Yes (Clean sealing塞 can be repeatedly punctured, reusable, environmentally friendly and economical)

Secondary Sealing Function: Yes (Unique sealing塞 puncture needle hole sealing, ensures airtightness of sealed tube)

Schlenk Technical Parameters:

Reactor Sealing Method: O-ring threaded soft seal

Extended Gas Line Quick Connect: Yes (New design for quick installation and double shut-off,任意 operation))

Schlenk Operation Panel: Yes (Easy-to-use modular gas置换 platform))

Micro Positive Pressure Schlenk Line: Yes (Simulates glove box positive pressure system, equipped with high-quality storage气囊))

Reaction Gas Schlenk Line: Yes (任意 switch between inert gas and reaction gas))

Inert Gas Schlenk Line: Yes (任意 switch between inert gas and reaction gas))

Reaction Gas Supply Method: Cylinder supply (Requires self-provided cylinder and减压器))

Inert Gas Supply Method: Cylinder or fume hood supply (Requires self-provided cylinder and减压器))

Safety-Related Parameters:

Visual Protective Cover: Yes (Safety protection,抗 environmental interference))

Safety Anti-Explosion Function: Yes (Safety protective cover))

Withstand Positive Pressure: ≤4atm (Maximum pressure tolerance for sealed tube reaction))

Maximum Vacuum: 0.2mbar (Single point can reach 0.15mmHg, requires self-provided 2L/S vacuum oil pump))

Overheat Protection: Yes (Can be set任意 between 50-360°C, automatic power off if temperature exceeds set value))

Other Characteristic Parameters:

Quick Hover Function: Yes (Quick stop of reaction, lift to stop))

Instrument Weather Resistance: Silver corrosion-resistant aluminum alloy shell (Aesthetically pleasing, corrosion-resistant protection))

Timer Function: Yes (Countdown for temperature control and stirring from 0-99h))

Mass Volume: 22kg/D*W*H=45*35*65cm

Protection Level: Ip42

Power Supply: 650W, Ac220-240V, 50/60HZ

Operating Environment: Ambient temperature: 0 ~ 35°C, Relative humidity: 80%

Noise Level: 70dB

Complete Set of Synthesis Accessories: Yes