IMJ Laboratory Fully Automatic High-Pressure Steam Sterilizer

Guangzhou Jincheng Scientific Instruments Co., Ltd. supplies the IMJ series of fully automatic high-pressure steam sterilizers, with a maximum sterilization temperature setting of 138 degrees Celsius.

Features of the Fully Automatic High-Pressure Steam Sterilizer:

Maximum sterilization temperature can be set to 138 degrees Celsius

Utilizes PT1000 sensor for more precise temperature control, with a display accuracy of 0.1 degrees

Dual water level monitoring functions: electronic water level sensor and temperature-based water level sensor

Five-level password setting function for data traceability in pharmaceutical factories, compliant with GMP and FDA certification requirements, capable of printing F0 values

Configurable negative pressure gauge with a maximum display of 0.5, overcurrent and short-circuit protection systems

Standard optimized dry-burn prevention function, over-temperature protection system, over-pressure protection, and safety valve

Lid-opening heating stop function

Real-time data saving function, memory storage for 60 programs, programmable sterilization programs for various modes

Voice prompt function

After sterilization is completed, the exhaust valve can release steam at six preset speeds, with manual adjustment possible during the exhaust process

Freertos embedded operating system

Standard USB drive for real-time data recording

Automatic detection and verification of the functional relationship between temperature and pressure to ensure true saturated steam conditions

Automatic detection of cold air discharge to ensure internal steam exhaust function and maintain a pollution-free environment

Adjustable boiling point temperature based on altitude

Exhaust temperature adjustable within the range of boiling point plus 0-25 degrees Celsius

Dual temperature sensors for monitoring air and water temperatures

One item sensor hole on the lid and two预留 verification holes on the tank for easy validation connections

Self-sensing pressure interlock device, lid closure inspection system, and leakage protection device

SafetyPressure InterlockStructure

During startup, sterilization initiation, and the sterilization process, micro-position switches monitor the interlock mechanism in real-time; any abnormality triggers an alarm and shutdown to ensure safety.

The lid cannot be opened if there is pressure inside the chamber (equipped with a pressure sensor).

The lid cannot be opened during a sudden power failure in the sterilization process.

After sterilization, the lid opening temperature can be set arbitrarily within a range below 90 degrees Celsius.

Parameters of the Fully Automatic High-Pressure Steam Sterilizer: