Bin wall fluidizer

Shandong Jinglan produces point-type fluidizers, fluidizing nozzles, and fluidization nozzles. The bin wall fluidizer is a key flow aid component in powder material handling systems, primarily used to prevent material bridging and arching during silo discharge. Its industrial application scenarios, application fields, functions, and installation locations are as follows:
Blast furnace pulverized coal injection system‌: Eliminates powder accumulation in the cone, ensuring fluidized transport of pulverized coal. Installed at the cone of the injection tank and dead zones of the powder conveying pipe.
Power/metallurgy silos‌: Prevents ash hopper clogging and improves discharge efficiency. Installed at the dust collector ash hopper and the cone section of powder silos.
Chemical powder processing‌: Resolves cohesive material caking and optimizes reaction efficiency. Installed at the reactor hopper and pneumatic conveying pipelines.

Example Technical Parameters
Parameter‌‌Typical Value
Aperture Size‌‌0.5–100μm (customizable)
Operating Pressure‌‌≤0.05MPa (starting pressure)
Applicable Temperature‌‌-220–480°C
Standard Specifications‌‌DN40/DN80/DN100/DN125
V. Innovative Design
Cross-shaped fluidizing plate‌: Slits arranged in a cross pattern (0.5mm gap), with concentrated airflow to enhance suspension effect.
Modular point array‌: Independently controlled airflow units, flexibly adapting to different material characteristics, reducing pressure loss by 15–20%.

Note: The above technical parameters and design examples are compiled from publicly available data of industrial equipment suppliers. Actual selection should be validated based on specific working conditions.