Electric High Pressure Threaded Ball Valve Product Overview
The electric high pressure threaded ball valve produced by GEROYAL consists of a forged steel high pressure valve body and an electronic angular travel electric actuator. The electric actuator adopts an integrated structure, which can directly perform on/off adjustment with a 220V power input. It can also have a built-in servo module, allowing control operation with an input control signal (4～20mA DC or 1～5V DC) and single-phase power supply. The main components of the electric high pressure threaded ball valve are forged by professional manufacturers, overcoming the potential defects of cast steel valves and maintaining structural pressure resistance uniformity under higher working pressures. Applicable media: water, oil, gas, and other non-corrosive media, as well as acid and alkali corrosive media. The electric high pressure threaded ball valve is widely used in chemical, petroleum, natural gas, metallurgy, and other industries, as well as in applications involving hydrogen sulfide media, high impurity content, and severe corrosion.
Electric High Pressure Threaded Ball Valve Main Technical Parameters and Performance
| Nominal Diameter DN (mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 |
|---|
| Allowable Pressure Difference (MPa) | ≤ Nominal Pressure |
| Valve Body Type | Three-Piece Forged Valve Body |
| Nominal Pressure | PN16.0, 25.0, 32.0, 42.0 MPa; ANSI 150, 300, 600, 900, 1500, 2500LB |
| Connection Type | Threaded (External Thread, Internal Thread) |
| Sealing Packing | Nylon, V-Type PTFE Packing, etc. |
| Valve Core Type | O-Type Ball Valve Core |
| Flow Characteristic | Approximate Quick Opening Characteristic |
| Action Range | 0～90°, 0～360° |
| Leakage Q | Soft Seal: Zero Leakage |
| Basic Error | ±1% |
| Hysteresis | ±1% |
| Dead Zone | ≤1% (Adjustable) |
| Adjustable Range | 250:1 |
| Configured Actuator | Can be equipped with PSQ, BV-TORK, UNIC, 361RS, OV-TORK, and other series of angular travel electric actuators |
| Control Method | Switch Position Light (On/Off Two-Position Control), Passive Contact Signal, 1/5K Potentiometer, Intelligent Regulation (4～20mA Analog Signal Control) |
Electric High Pressure Threaded Ball Valve Actuator Technical Parameters
| Actuator Category | Imported OV-TORK Series Actuator Parameters | Imported BV-TORK Series Actuator Parameters |
|---|
| Power Supply Voltage | Standard: 220V AC Single Phase Optional: 110V AC Single Phase, 380/440V AC Three Phase, 24V/110V/220V AC |
| Output Torque | 50N·M～2000N·M | 50N·M～3000N·M |
| Action Range | 0～90° 0～360° | 0～90°, 0°～270° Optional |
| Action Time | 15 seconds/30 seconds/60 seconds | 18S～112S |
| Protection Device | Overheat Protection | Built-in Overheat Protection, Overload Protection |
| Ambient Temperature | -30°～60° | -20℃～+70℃ |
| Manual Operation | With Attached Handle Operation | Mechanical Clutch Mechanism, with Handwheel Operation |
| Mechanical Limit | Electrical and Mechanical Dual Limits | 2 External Adjustment Bolts |
| Protection Level | IP65 | IP65, IP67, Customizable IP68 |
| Explosion-Proof Level | Non-Explosion-Proof | ExdⅡ BT4, ExdⅡ CT6 |
| Position Measurement | Optional Switch or Potentiometer | Potentiometer, Proportional Control Unit |
| Drive Motor | 8W/E | Squirrel Cage Asynchronous Motor |
| Inlet Interface | PE1/2〞 Inlet Wire Lock | 2 PF 3/4” |
| Housing Material | Aluminum Alloy | Steel, Aluminum Alloy, Aluminum Bronze, Polycarbonate |
| External Coating | Dry Powder, Epoxy Polyester, with Strong Anti-Corrosion Function |
Electric High Pressure Threaded Ball Valve Main Component Materials
| Component Name | Component Material |
|---|
| Valve Body | 304 | 316 | 316L |
| Ball | 304 | 316 | 316L |
| Stem | 304 | 316 | 316L |
| Seat Seal Ring | PTFE, Carbon Fiber + PTFE, Para-Polybenzene, High Pressure Nylon Seal |
| Packing | V-Type PTFE, Reinforced Teflon |
Electric High Pressure Threaded Ball Valve Main Performance Indicators
| Nominal Diameter DN (mm) | DN15-300 |
|---|
| Nominal Pressure | PN (MPa) | 10.0 | 16.0 | 25.0 | 32.0 | 42.0 |
| Test Pressure | Strength Test | 15.0 | 24.0 | 37.5 | 48.0 | 63.0 |
| Seal Test | 11.0 | 17.6 | 27.5 | 35.2 | 46.2 |
| Low Pressure Air Tightness Test | 0.5～0.7 |
| Applicable Media | Natural Gas, Water, Oil, Steam, Nitric Acid (Temperature ≤130℃), Acetic Acid (Temperature ≤200℃) |
Electric High Pressure Threaded Ball Valve Product Selection
(1) Valve Body Parameters: Nominal diameter, working pressure, process media, application environment, valve body material, and other series parameters.
(2) Actuator Parameters: Power supply voltage, control method, control signal (4-20mA, 1-5V), action mode (electric-open, electric-close).
Please provide the above technical parameters in as much detail as possible to facilitate accurate product selection by our production and technical personnel. If you have any questions, please feel free to call us. We are committed to providing you with high-quality service!
