Air Compressor Cleaner_Carbon Deposit Cleaner for Air Compressors

Air Compressor Cleaner_Air Compressor Carbon Deposit Cleaner

During the normal operation of an air compressor, if the unit shuts down due to high temperature, the compressor head becomes stuck, or the oil passage is blocked by contaminants such as gum, leading to poor oil supply and rendering the air compressor unusable due to overheating, it should be cleaned promptly based on production conditions.

This issue introduces a product independently developed and produced byJiangsu JIT Company, a no-disassembly cleaning agent for air compressors, namely theJIT-Q8311 Air Compressor Carbon Deposit Cleaner.

JIT-Q8311 Air Compressor Carbon DepositCleaner is compounded from various surfactants and organic additives, representing anew generation of water-soluble, biodegradableair compressor cleaner by JIT. This productfeatures excellent permeability, emulsification, and the ability to removeoil dirt and coke. It is simple and convenient to use, can be discharged directly after use, and is suitable for dissolving difficult-to-remove substances such as crude oil gum and asphalt, as well as cleaning surface-deposited oil stains.It can be used to remove carbon deposits and copolymers of carbon and oil dirt from parts such as engine inner walls, compressors, oil nozzles, oil heat exchangers, and screws,significantly reducing the cleaning costs foroil dirt in pipelinesandoil stains on pipe fittings, with very noticeable effects and high cost-effectiveness.

Applicable Advantages

This product can remove coke and carbon deposits in a short time. As long as the shutdown is caused by coking and the compressor head can rotate after heating, this product is suitable for cleaning. It eliminates the need to disassemble the compressor head or remove and install components such as oil circuit radiators, saving time and effort, reducing labor costs, and minimizing downtime.

Air Compressor Oil Circuit Cleaning Method

1. Drain the oil from the machine's oil-gas tank and add this product to the oil-gas tank (if the coking is severe and the oil in the compressor head and oil-gas tank cannot be drained, heating can be used for cleaning. Coking substances will reduce in viscosity and become fluid when heated; boiling water can be added to the compressor head to dissolve the coke).

2. After adding this product, start the machine and run it until the temperature reaches above 80 degrees Celsius, maintain for about 5 minutes, then shut down. Open the oil drain switch and discharge the cleaning liquid completely.

3. Add water or new lubricating oil to the oil-gas tank, start the machine, and run it to flush impurities from the oil circuit (if using water, control the running time to within 3-5 minutes; if using oil for cleaning, the running time can be appropriately extended). If there are many impurities, increase the number of flushes appropriately.

4. After cleaning, use compressed air for blowing to discharge any residual liquid as much as possible.

5. Replace the oil separator element, add oil, and start the machine for operation.

If you have product needs or questions, please call Jiangsu JIT Company to request a cleaning plan and quotation.