MCZ-500 Mine Anchor Cable Dynamometer

MCZ-500Type Anchor Bolt (Cable) Force Meter—

The anchor bolt (cable) force meter is an instrument used to measure the force changes in anchor cables and bolts, applicable to various types of anchor cables and bolts commonly encountered in engineering. By monitoring the working conditions of anchor cables and bolts, it enables the monitoring of the support quality of anchor cables and bolts, and consequently, the monitoring of stress (stress manifestation) in roadways, chambers, and surrounding rock. It serves as a monitoring instrument for studying the stability of roadways and chambers.

Technical parameters of the anchor bolt (cable) force meter: Working pressure: 0-60 MPa; 0-500 kN; Working fluid: Hydraulic grease; Pressure gauge grade: 2.5;

Usage method of the anchor bolt (cable) force meter: Insert the exposed part of the anchor bolt or cable into the center hole of the force meter. Tighten the nut with a torque wrench until the nut reaches the pre-stress value specified in the operating procedures, and record the initial value at the start. Subsequently, record the tension values at various time intervals. 1. The anchor bolt force meter and anchor cable force meter must not be subjected to partial forces; parts other than the pressure cylinder should not bear any force, as this may affect the actual performance of the product. 2. When installing the anchor bolt force meter or anchor cable force meter, ensure that the anchor bolt is threaded through the center hole of the force meter and the fixing nut is tightly secured. 3. If oil leakage is detected at the pressure gauge connection, promptly replenish lithium-based lubricating oil, replace the seals, and recalibrate the device. As a manufacturer of mining anchor bolt (cable) force meters, we possess comprehensive processing equipment and strong practicality, ensuring that users can purchase with confidence and use with satisfaction, earning deep trust from our customers.