DYTN Electro-Hydraulic Discharger

DYTNElectro-Hydraulic DischargerPlow Type DischargerPlow Type Discharger Manufacturer
The DYTN electro-hydraulic variable trough angle discharger is installed on the intermediate frame of a belt conveyor. It can evenly and continuously discharge materials conveyed by the belt into hoppers or required locations as an auxiliary device for belt conveying. This discharger improves upon older models by adding a variable trough angle roller. The plow blade is made of wear-resistant polyurethane material with a low friction coefficient, and it uses an electro-hydraulic push cylinder as the power source. It overcomes the shortcomings of older dischargers, such as incomplete material discharge, belt scratching, poor overload capacity of electric push rods, frequent motor burnout, bent lead screws, and mechanical fragility. It is currently one of the most advanced dischargers available domestically. Main features:
1. Discharging state: The plow blade descends, the middle flat idler set rises, and the end trough idlers become flat idlers.
2. Non-discharging state: The plow blade lifts, the middle flat idler set descends, and the end idlers return to the trough shape, allowing materials to pass normally. 3. This product features advanced design, compact structure, and simple operation. The lifting and lowering of the plow head are achieved through forward and reverse motor rotation, ensuring sensitive action.
4. The use of an electro-hydraulic push cylinder as the power source overcomes the drawbacks of electric push rods, such as motor burnout and jamming, making the discharger more reliable and complete.

Main products of our company:DTElectric Push RodDYTZElectro-Hydraulic Push RodElectro-Hydraulic Jaw Gate, Electric Jaw Gate, Electro-Hydraulic Angle Drive, Inlet SizeElectro-Hydraulic Push Rod Drive, Electro-Hydraulic Push Rod Flat Gate ValveSteel Cord Belt Stripping MachineElectric Push RodDTZElectric Push RodDYTPElectro-Hydraulic Push RodExplosion-Proof Push RodDEZJaw GateElectro-Hydraulic Sector GateBelt Peeling MachineSteel Cord Stripping MachineSingle Side DischargerDouble Side DischargerDDZType Belt Break CatcherBelt Break Catcher for Belt ConveyorsBelt Break Protection Device, Belt Break Catcher Layered Belt Peeling MachineBelt Conveyor AlignerChain Type One-Way AlignerFully Automatic AlignerVariable Trough Angle DischargerElectro-Hydraulic DischargerPlow Type Discharger

Jining Anteli Conveying Equipment Co., Ltd.

Contact: Jia Hui

Mobile: 15965378780

Tel：0537-2340887

Fax:  0537-2340887

QQ:  3128074961

Email:3128074961@qq.com

AliWangWang：jnanteli01