NIKO Thermo Dynamic Steam Trap

NIKONikoThermodynamic Steam Trap
Brand: JiangsuNIKO Niko
Connection Type: Flange
Material: Cast Iron, Cast Steel, Stainless Steel.
Nominal Diameter: DN15-DN100
Nominal Pressure: PN16-25
Operating Temperature: -29～300℃
Product Description:NIKO Niko thermodynamic steam trap is a very robust and simple-operating steam trap. It works by utilizing the dynamic force generated when flash steam passes through the trap. As shown in the overview diagram, the only moving part is a disc located on the flat surface of the control chamber. During the startup phase, the disc is lifted by pressure, allowing condensate and air to pass over the inner valve seat and exit through three small holes under the disc. The thermodynamic steam trap contains a moving disc that acts as both the sensing element and the actuating component. Based on the different thermodynamic principles of steam and condensate flow velocity and volume changes, a pressure differential is created above and below the disc, driving the disc to open or close the valve. The steam leakage rate is 3%, and the subcooling degree is 8°C-15°C.
NIKO Niko Thermodynamic Steam Trap Structural Features:The valve body is simple and robust, lightweight, with a long service life and low installation cost. It operates over a wide pressure range and does not require changing or adjusting the valve port size with pressure variations. The valve body is resistant to freezing damage, water hammer, vibration, and corrosion. It is easy to install and can be mounted in any orientation. With only one moving part—the stainless steel disc—it requires almost no maintenance. It has an air venting function to prevent air blockage. It comes with a built-in filter to protect the trap from debris. The hardened stainless steel valve seat and disc ensure long service life under high pressure.
NIKO Niko Thermodynamic Steam Trap Advantages:Stainless steel body, compact size, lightweight, simple structure, resistant to water hammer; can be installed in any orientation. Requires minimal maintenance. The only moving part is the stainless steel disc. Discharges condensate at saturated steam temperature. Due to intermittent condensate discharge, it is easy to determine if there is a malfunction. Operates over a wide pressure range with very low leakage rate. The trap itself has minimal heat loss (compared to float and inverted bucket steam traps).
Applications: Steam, hot and cold water, thermal oil systems, and other industries and working conditions.