Molten iron analyzer testing equipment

Hot Metal Analyzer Testing Equipment

Principle Overview:

The Hot Metal Analyzer Testing Equipment is a new generation of hot metal quality management testing equipment developed by our company after years of research and improvement, offering higher measurement accuracy and more stable performance. Hot metal quality thermal analysis technology originates from the phase diagram theory in metallurgy and has long been widely used in developed countries for the detection and control of hot metal in front of the furnace. It is an indispensable testing method in advanced casting technology and plays a crucial role in the production of high-quality castings. The Hot Metal Quality Management Instrument uses the solidification temperature curve of the cast iron structure formation process as the measurement object. The built-in computer analyzes the solidification temperature curve to obtain characteristic points of the curve under different compositions. Based on these characteristic points, it calculates hot metal performance parameters such as carbon equivalent (CE%), carbon content (C%), silicon content (Si%), nodularity (SG%), and tensile strength (RM). The thermal analyzer detection time is approximately 90 seconds, completing the test within the waiting time of the hot metal. Then, based on the automatically calculated amounts of carburizer, ferrosilicon, and scrap steel, the hot metal composition is adjusted to achieve the appropriate composition before pouring.

Specifications of the Hot Metal Analyzer Testing Equipment

Temperature Transmitter: Original imported temperature transmitter, min resolution 0.1°C, accuracy grade F.S ±0.01%

Main Board: Industrial baseboard

Display: 19-inch TFT true color display

Command Input: Industrial waterproof mouse

Recording Output: USB mobile storage

Power Supply: AC220V 50Hz

Instrument Dimensions: Desktop 450×350×400mm

Instrument Functions

Measurement Functions: Hot metal grade, carbon equivalent, carbon content, silicon content, undercooling, nodularity, tensile strength, etc.

Setting Functions: Can set 10 calibration lines, 10 target compositions, and link calibration lines with target materials

Supplement Function: Calculates the supplement amount based on measurement results, target composition, hot metal weight, and yield rate

Recording Function: Records 5000 measurement results in chronological order, with process replay capability

Browsing Function: Can browse trend distribution charts of main measurement parameters and differential charts of solidification temperature curves for data analysis

Output Function: Automatically outputs measurement records to a USB drive for transfer to other computers for review and analysis

Measurement Technical Parameters

Temperature Temp: Measurement range 0—1370°C; Measurement accuracy F.S ±0.01%

Carbon Equivalent CE%: Measurement range 2.20—5.00%; Measurement accuracy ±0.05%

Carbon Content C%: Measurement range 2.00%—4.80%; Measurement accuracy ±0.05%

Silicon Content Si%: Measurement range 0.20%—4.50%; Measurement accuracy 0.10%

Nodularity SG%: Measurement range 60%—95%; Measurement accuracy ±10.0%

Tensile Strength RM: Measurement range HT100—HT350; Measurement accuracy: min value

CE, C%, Si% Correction Value Setting Range: -0.99 — 0.99

Software Functions

CE, C, Si Content Measurement: Can measure active CE, C, Si content for 10 target materials, inferring hot metal grade (HT);

Hot Metal Adjustment Calculation: Based on target composition range, hot metal weight, carburization yield rate, silicon yield rate, and measurement results, calculates the amount of carburizer, ferrosilicon, or scrap steel to achieve the target composition.

Nodularity Measurement: By measuring the eutectic degree and undercooling of the hot metal, and assuming sufficient active Mg content, infers the nodularity of the nodular iron.

Hot Metal Composition Management: Sets carbon equivalent, carbon content, and silicon content ranges based on product grade. The instrument displays content in different colors: exceeding the range in red, below the range in green. Users can modify the content range.

Active Composition Measurement Screen Introduction

1) Current date and time

2) Instrument version number

3) Max temperature (TM)

4) Liquidus temperature (TL)

5) Eutectic temperature (TE)

6) Carbon equivalent (CE1)

7) Carbon content (C%)

8) Silicon content (Si%)

9) Estimated hot metal grade and range graph (HT/FC)

10) Carbon equivalent and range graph (CE2)

11) Carbon content and range graph (C%)

12) Silicon content and range graph (Si%)

13) Thermal analysis temperature curve

14) Real-time temperature (Celsius)

15) Current detection line information box

16) Target composition range for Si

17) "Function Switch" button

18) "Target Material" button

19) "Weight Setting" button

20) "Detection Setting" button

21) "Data Browse" button

22) "End System" button

Nodularity Measurement Interface Introduction

1) Current date and time

2) Instrument version number

3) Max temperature (TM)

4) Liquidus temperature (TL)

5) Eutectic low point ()

6) Recalescence temperature (TEh)

7) Cooling rate and chart

8) Undercooling and chart

9) Recalescence time and chart

10) Nodularity and chart

11) Temperature curve

12) Real-time temperature

13) Current detection line information

14) "Function Switch" button

15) "Material Selection" button

16) "Weight Setting" button

17) "Detection Setting" button

18) "Data Browse" button

19) "End System" button