Molten Iron Quality Management Analyzer Testing Equipment

Molten Iron Quality Management Analyzer Testing Equipment

Principle Overview:

The molten iron quality management analyzer testing equipment is a new generation product developed by our company through years of research and improvement, offering higher measurement accuracy and more stable performance. The thermal analysis technology for molten iron quality originates from the phase diagram theory in metallography. It has long been widely used in developed countries for the detection and control of molten iron in front of the furnace, serving as an indispensable testing method in advanced casting technology and playing a crucial role in the production of high-quality castings. The molten iron quality management analyzer uses the solidification temperature curve of the cast iron structure formation process as the measurement object. The built-in computer analyzes the solidification temperature curve to obtain characteristic points of the curve under different compositions. Based on these characteristic points, it calculates molten iron performance parameters such as carbon equivalent (CE%), carbon content (C%), silicon content (Si%), nodularity (SG%), and tensile strength (RM). The thermal analyzer detection time is approximately 90 seconds, completing the test within the waiting time of the molten iron. Then, based on the automatically calculated amounts of carburizer, ferrosilicon, and scrap steel to be added, the molten iron composition is adjusted to achieve the appropriate composition before pouring.

Instrument Specifications

Temperature Transmitter: Original imported temperature transmitter, minimum resolution 0.1°C, accuracy class F.S ±0.01%

Main Board: Industrial baseboard

Display: 19-inch TFT true color display

Command Input: Industrial waterproof mouse

Recording Output: USB removable storage

Power Supply: AC220V 50Hz

Instrument Dimensions: Desktop 450×350×400mm

Instrument Functions

Measurement Functions: Molten iron grade, carbon equivalent, carbon content, silicon content, undercooling, nodularity, tensile strength, etc.

Setting Functions: Can set 10 calibration lines, 10 target compositions, linkage between calibration line and target material

Supplement Function: Calculates supplement amounts based on measurement results, target composition, molten iron weight, and yield rate

Recording Function: Records 5000 measurement results in chronological order, allows process replay

Browsing Function: Can browse trend distribution charts of main measurement parameters and differential graphs of solidification temperature curves for data analysis

Output Function: Automatically outputs measurement records to USB drive for transfer to other computers for review and analysis

Measurement Technical Parameters

Temperature Temp: Measurement range 0—1370°C; Measurement accuracy F.S ±0.01%

Carbon Equivalent CE%: Measurement range 2.20—5.00%; Measurement accuracy ±0.05%

Carbon Content C%: Measurement range 2.00%—4.80%; Measurement accuracy ±0.05%

Silicon Content Si%: Measurement range 0.20%—4.50%; Measurement accuracy ±0.10%

Nodularity SG%: Measurement range 60%—95%; Measurement accuracy ±10.0%

Tensile Strength RM: Measurement range HT100—HT350; Measurement accuracy: Minimum value

CE, C%, Si% Correction Value Setting Range: -0.99 — 0.99

Software Functions

CE, C, Si Content Measurement: Can measure active CE, C, Si content for 10 target materials,推算 iron grade (HT);

Molten Iron Adjustment Calculation: Based on target composition range, molten iron weight, carburization yield rate, silicon yield rate, and measurement results, calculates the amount of carburizer, ferrosilicon, or scrap steel to be added to hit the target composition.

Nodularity Measurement: By measuring the eutectic degree and undercooling of the molten iron, and assuming sufficient active Mg content,推算 the nodularity of nodular iron.

Molten Iron Composition Management: Set carbon equivalent, carbon content, and silicon content ranges based on product grade. The instrument will display content in different colors:超 high in red, low in green. Users can also modify the content range themselves.

Active Component Measurement Screen Introduction

1) Current date, time

2) Instrument version number

3) Maximum temperature (TM)

4) Liquidus temperature (TL)

5) Eutectic temperature (TE)

6) Carbon equivalent (CE1)

7) Carbon content (C%)

8) Silicon content (Si%)

9) Estimated iron grade and range graphic (HT/FC)

10) Carbon equivalent and range graphic (CE2)

11) Carbon content and range graphic (C%)

12) Silicon content and range graphic (Si %)

13) Thermal analysis temperature curve

14) Real-time temperature (Celsius)

15) Current detection line information box

16) Target composition range for Si

17) "Function Switch" button

18) "Target Material" button

19) "Weight Setting" button

20) "Detection Setting" button

21) "Data Browse" button

22) "End System" button

Nodularity Measurement Interface Introduction

1) Current date, time

2) Instrument version number

3) Maximum temperature (TM)

4) Liquidus temperature (TL)

5) Eutectic low point ()

6) Recalescence temperature (TEh)

7) Cooling rate and chart

8) Undercooling and chart

9) Recalescence time and chart

10) Nodularity and chart

11) Temperature curve

12) Real-time temperature

13) Current detection line information

14) "Function Switch" button

15) "Material Selection" button

16) "Weight Setting" button

17) "Detection Setting" button

18) "Data Browse" button

19) "End System" button