Optical Emission Spectrometer LC-9610

LC-9610 Optical Emission Spectrometer
Instrument Introduction
The LC-9610 Optical Emission Spectrometer is a rapid quantitative analysis instrument for determining the composition of ferrous and non-ferrous metals. It is widely used in various industries such as steel, non-ferrous metals, metallurgy, machinery, construction, chemical equipment, and quality inspection systems for material analysis. It is also applied in furnace analysis during metal smelting and final product certification analysis.
◆ Rapid furnace analysis through various processes to achieve in-process control.
◆ Certification analysis of product specifications.
◆ Material acceptance.
◆ Quality inspection.
Main Features
1. 750mm focal length grating design, Paschen-Runge mounting, high vacuum, high resolution, and high sensitivity.
2. The electronic system adopts an international standard crate design with highly integrated circuits, resulting in a low failure rate.
3. The excitation source frequency is adjustable between 150/600Hz, allowing selection of different excitation parameters for different samples to achieve optimal analysis results.
4. Solid-state auxiliary electrodes for the excitation source eliminate interference issues, enhance stability, and require no adjustment.
5. During sample excitation, no water cooling of the excitation stand is required, enabling continuous sample analysis while maintaining good data quality.
6. Multi-element automatic tracing allows rapid analysis of deviations of each element relative to the matrix elements.
7. Channel negative high voltage is divided into 8 levels and automatically adjusted by the computer, greatly improving channel utilization and the optimal linear range of analytical spectral lines for different materials, reducing the number of channels required and lowering costs.
8. Overall temperature control measures for the optical section ensure normal instrument operation, reducing environmental requirements.
9. High-precision linear motors are used for slit scanning, providing high speed and accuracy.
10. The vacuum chamber is made of aluminum alloy in a single molding process.
11. Seismic-resistant design of the spectrometric chamber, with critical optical components such as gratings and slits dynamically mounted for high optical stability.
12. A built-in fatigue lamp in the spectrometric chamber enhances the stability of photomultiplier tubes, eliminates dead time, improves the signal-to-noise ratio, and extends service life.
13. Spectrometer software system supports multiple languages to meet the requirements of different countries.
14. The computer software includes a database system for easy querying and printing of measurement data, as well as remote data transmission via network for convenience and efficiency.
Technical Parameters
Detectable Matrices (Multi-Matrix): Analysis of various metals and their alloys, including Fe, Al, Cu, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag, etc.
Analysis Channels (Multi-Channel): Expandable up to 45 channels
Analysis Wavelength Range (Broad Range): 120~850nm
Detection Time (Short Duration): Generally less than 30 seconds, depending on the sample type
Optical Chamber (Precision Temperature Control): 38℃±0.2℃
Power Supply: Single-phase power supply with protective grounding. Voltage: 220VAC, Frequency: 50Hz, Power Consumption: 1.8KVA
Environmental Conditions: Operating temperature: 10-30℃, Storage temperature: 0-45℃, Humidity: ≤85%