HSY-265Z Automatic Kinematic Viscosity Tester

This instrument is designed and manufactured in accordance with the national standard "GB265-88 Petroleum Products—Determination of Kinematic Viscosity" as a specialized testing device, suitable for determining the kinematic viscosity of liquid petroleum products. The instrument features timing of the sample's flow time and automatic calculation of the final kinematic viscosity result. This method is applicable for determining the kinematic viscosity of liquid petroleum products (referring to Newtonian liquids), with units of m²/s, though mm²/s is commonly used in practice. Dynamic viscosity can be obtained by multiplying the measured kinematic viscosity by the density of the liquid. This method involves measuring the time for a fixed volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature. The product of the viscometer's capillary constant and the flow time gives the kinematic viscosity of the liquid at that temperature. The product of the kinematic viscosity at that temperature and the density of the liquid at the same temperature yields the dynamic viscosity at that temperature.

I. Automatic Kinematic Viscosity Tester Instrument Features

1. 7-inch high-definition touchscreen operation for ease of use; four test channels designed to improve work efficiency.

2. Utilizes high-precision temperature control technology with an accuracy of ±0.01°C.

3. Fully controlled by high-performance MCU for stability and reliability.

4. Automatically stores test results for viewing at any time.

5. Capable of long-term continuous operation with an extremely low failure rate.

6. Equipped with over-temperature protection for safer and more reliable testing.

7. Features liquid level protection; heating automatically stops if the constant-temperature liquid falls below a certain level to protect the instrument.

8. Built-in thermal printer for automatic printing of test results.

II. Automatic Kinematic Viscosity Tester Technical Parameters

1. Temperature range: Room temperature to +150°C, accuracy ±0.01°C.

2. Temperature sensor: German Pt 100 stainless steel probe with built-in temperature calibration for reliable results.

3. Heating method: Electric heating unit, heating power 1000 W.

4. Display: 7-inch industrial color touchscreen.

5. Temperature calibration: Adjustable from 0 to 20.

6. Data storage: 100 sets of test results.

7. Power supply: AC220V, 50Hz.

8. Power: 1500 W.

9. Operating environment temperature: 10～35℃.

10. Storage environment temperature: 0～50℃.