Laboratory Flat Vulcanizing Machine

Laboratory Flat Vulcanizing Machine supplies internal mixer, open mill, extruder, blow molding machine, cast film machine, melt extrusion spinning machine, meltblown fabric machine, sheet extruder design, processing and customization!

Dongguan JiuTong Machinery Co., Ltd. National Unified Service Hotline: 138-2574-4148 Shao Li

Address: Second Industrial Zone, Guchong Community, Wanjiang District, Dongguan City

Item Name: HT-20 T Flat Vulcanizing Machine (Fully Automatic Hot Press Forming Machine) Hot Press Machine

Nominal Mold Clamping Force: 20T

1.Temperature Control Range: ≤300℃.

2.Operation Mode: Automatic/Manual  Dual Use  Backup operation panel for use in case of emergency failure;

3.Temperature Control Accuracy: +2℃; Microcomputer control, stable performance, precise temperature control. (Each panel independently displays temperature value)

4.Heating Method: Electric Heating

5.Hot Platen: 300×300 (mm); Uses high-strength vulcanizing machine cast heat conduction plate. High hardness, good closing parallelism accuracy, fast heat conduction, fast cooling; Resistant to strong prolonged pressure and not easily deformed.

6.Cooling Method: Circulating Water

7.Closing Gap: Fully closed state

8.Closing Accuracy: ≤0.20mm

9.Closing Speed: 5mm/min, can be changed as needed during the pressing process.

10.Closing Direction: From bottom to top

11.Platen Spacing: 150 mm

12.Pressure Accuracy: ≤5%.

13.Pressure Holding Time: 30 minutes;

14.Hydraulic System: High-performance hydraulic system; Explosion-proof, stable lifting after startup, low noise, high load-bearing strength.

15.Weight: 960kg

16.Dimensions: (W×D×H)1100×600×1500 mm