ZLB3000-SQ Urban Street Light Intelligent Lighting Voltage Stabilization Energy-Saving Device

       The intelligent power saucer adopts advanced electromagnetic conversion technology, regulating the output voltage through an electronic matrix. The three-phase circuit employs an independent control method, with a microcomputer sampling the input and output voltages and performing tracking processing on the output to ensure the output voltage remains within the set range.ZLB3000-SQ SeriesParameter Specifications Summary: 10KVA, 15KVA, 20KVA, 30KVA, 40KVA, 45KVA, 50KVA, 60KVA, 80KVA, 100KVA, 120KVA, 125KVA, 150KVA, 160KVA, 180KVA, 200KVA, 250KVA, 300KVA, 315KVA, 400KVA;

ZLB3000-SQ Urban Street Light Intelligent Lighting Voltage Stabilization Energy-Saving DevicePrecautions

When used beyond the rated coil, contact rating, switching life, and other usage ranges, abnormalities, smoking, or spontaneous combustion may occur. Electrical components and equipment generally have a certain failure rate.

Durability varies depending on usage and conditions. Please ensure to conduct actual machine verification based on actual usage conditions.

If continued use occurs under performance degradation, abnormalities, smoking, or fire may result due to insulation aging.

To prevent personal injury, fire accidents, social damage, etc., due to product failure or end of life, adopt redundant design, fire spread prevention design, error-proof design, and other safety measures along with periodic maintenance.

When the relay equipment is powered, there is a risk of electric shock from charged parts; please be cautious.

When installing, maintaining, or troubleshooting the device (including terminal blocks, sockets, and other connecting components), please disconnect the power supply.

When connecting terminals, first refer to the internal wiring diagram in the manual and then connect correctly.

Incorrect connections may lead to unexpected malfunctions, abnormalities, or spontaneous combustion.

Performance Parameters

◇ Input Grid: Rated Voltage Three-Phase 380V ±10% / Single-Phase 220V ±10%

◇ Frequency: 50Hz / 60Hz

◇ Voltage Waveform: Sine Wave

◇ Harmonic Pollution: None

◇ Parameters: Temperature -20°C to 45°C

◇ Humidity: Not more than 85%

◇ Altitude: Not exceeding 4000 meters

◇ Operating Parameters: Overload Current Capacity 1.1 times rated current for 30 minutes

◇ Overload Impact Capacity: Can withstand transient overload impact

◇ Product Lifespan: ≥ 100,000 hours

◇ Insulation: 2.5kV insulation between grid and casing

◇ Heat Dissipation: Fan cooling

◇ Fan Voltage: 220V

◇ Safety: EN61558-2-6, EN55014-1, EN61000-3-2, EN61000-3-3

◇ Cabinet Protection Level: IP42

◇ Insulation Resistance: >5MΩ

◇ Withstand Voltage Strength: Can endure 2000V for 1 minute

◇ Continuous Overload Capacity: 1.2 times

◇ Short-Time Overload Capacity: 1.5 times

◇ Nominal Energy Saving Rate: 15-45% or more

◇ Connection: Series connection in the circuit

◇ Maximum Allowable Temperature Rise: 70K

ZLB3000-SQ Urban Street Light Intelligent Lighting Voltage Stabilization Energy-Saving DeviceApplication Areas: The illuminance controller has significant energy-saving effects for ordinary fluorescent lamps, energy-saving fluorescent lamps, high-pressure sodium lamps, metal halide lamps, cold reflector halogen lamps, neon lights, etc. It is particularly suitable for street lights, factory workshops, highways, subway stations, supermarkets, restaurants, exhibition halls, parking lots, amusement parks, department stores, office buildings, light boxes, and other lighting applications.

 Urban Street Light Intelligent Lighting Voltage Stabilization Energy-Saving DeviceFunctional Indicators:

Based on the characteristics of lighting fixtures, outputs full voltage; achieves the purpose of extending the service life of lighting fixtures. This device can operate in standby mode, protecting energy-saving equipment and ensuring normal street light illumination.

No Harmonics: Since the intelligent street light controller uses thyristor control but is not in the main circuit, it does not generate any harmonics in the grid.

Does not produce any harmonic pollution to the grid, improving grid stability and expanding capacitor margin.

Remote Control and Monitoring: Achieves remote intelligent monitoring and control of power equipment lighting via the Internet and IoT; realizes intelligent control and management of power equipment through the lamp networking series controller;

* The power-saving device has a low-voltage automatic bypass function, automatically entering energy-saving mode once voltage returns to normal.

The equipment features an LCD screen for display and control functions, enabling real-time monitoring of operating three-phase voltage, current, temperature, cumulative operating time, and other parameters.