NT-7001 NAVTEX Receiver

NT-7001 NAVTEX Receiver

NAVTEX (Navigational Telex) is the abbreviated term for a navigational warning receiver. Vessels equipped with a NAVTEX receiver can receive information broadcast by coastal stations, including station identification numbers, as well as navigational warnings, meteorological warnings, emergency messages, and other safety-related maritime information.

The NT-7001 NAVTEX Receiver complies with IMO requirements for GMDSS equipment. It can simultaneously receive four frequencies, including the international frequency 518 KHz and local frequencies 486 KHz, 490 KHz, and 4209.5 KHz.
8-inch high-definition (1024×600 resolution), high-brightness LCD display with richer colors.
Fully meets the requirements of IMO MSC.148(77) standard.
Simultaneous reception of four frequencies: 518 KHz, 486 KHz, 490 KHz, and 4209.5 KHz.
Multiple protection measures: overvoltage protection, overcurrent protection, and reverse connection protection.
Standard external printer interface and external alarm output interface, compatible with DPU-414 printer.
When receiving A, B, D, or L messages, the content is displayed on the screen with an audible alarm.
Built-in WiFi module for online upgrades.
Self-test function to automatically detect device status.
Large-capacity message storage, capable of storing up to 72 hours of message data.
Important messages can be locked and permanently saved.

Display Unit: NT-7001
Screen Type: Color TFT LCD
Screen Size: 8 inches
Resolution: 1024 × 600 pixels
Screen Brightness: 500 cd/m²
Voltage Range: DC 10V–36V
Power Consumption: <10W
Power Protection: Overvoltage, overcurrent, and reverse connection protection
Receive Frequencies: 518 KHz (International); 486 KHz/490 KHz/4209.6 KHz (Local)
Modulation: F1B (Narrow-band Direct-Printing Telegraphy)
Sensitivity: 2 µV e.m.f. (50 ohms), <4% error rate
Storage Capacity: ≥200 received messages
Printer: Compatible with DPU-414 printer
Antenna: 50-ohm active antenna
External Interfaces: 2 inputs, 2 outputs, 1 alarm interface, 1 RS232
Upgrade Methods: USB, SD