Microcomputer-controlled electronic creep and stress rupture testing machine

Microcomputer-controlled Electronic Creep and Stress Rupture Testing Machine

Model: WDR-5000W

Application: The rubber creep testing machine is primarily used for tensile and compression creep rupture tests on non-metallic materials under ambient conditions, as well as low-cycle creep fatigue tests and creep-fatigue tests. The WDR5000 series microcomputer-controlled electronic creep and stress rupture testing machine is a new series of testing equipment developed by our company, based on years of experience in manufacturing electronic universal testing machines and creep rupture testing machines.

Standards Compliance:

1. JB/T 9373-1999 "Technical Conditions for Tensile Creep Testing Machines"

2. GB/T 16491-1996 "Electronic Universal Testing Machines"

3. GB 2611-92 "General Technical Requirements for Testing Machines"

4. GB/T 16825.2-2001 "Verification of Applied Force in Tensile Creep Testing Machines"

5. GB/T 2039-1997 "Metallic Materials—Tensile Creep and Stress Rupture Testing Methods"

6. HB 5195-96 "Metallic Materials—High-Temperature Tensile Stress Rupture Testing Methods"

7. HB 5151 "Metallic Materials—High-Temperature Tensile Creep Testing Methods"

8. ASTM E139-2006 "Standard Test Methods for Conducting Creep, Creep Rupture, and Stress-Rupture Tests of Metallic Materials"

Technical Parameters:

1. Maximum Test Force: 5 kN

2. Test Force Measurement Range: 1%-100% FS

3. Accuracy Class: 0.5

4. Indication Resolution: 1/300,000 (full-range resolution unchanged)

5. Permissible Error of Indication: Better than ±0.5% of indicated value

6. Adjustment Range: 0.01–100 mm/min (stepless speed regulation)

7. Relative Error of Indication: ±0.5%

8. Constant Test Force, Constant Deformation, Constant Displacement Control Range: 0.4%–100% FS

9. Constant Test Force, Constant Deformation, Constant Displacement Control Accuracy: Within ±0.1% when set value ≥10% FS; within ±1% when set value <10% FS

10. Deformation Rate Adjustment Range: 0.005–5% FS/s

11. Deformation Rate Control Accuracy: Within ±2.0% when rate <0.05% FS; within ±0.5% when rate ≥0.05% FS

12. Force Control Rate Accuracy: ±1% of set value

13. Displacement Rate Control Accuracy: Within ±1.0% when rate <0.01 mm/min; within ±0.2% when rate ≥0.01 mm/min

14. Gauge Length: 20–100 mm

15. Measurement Range: 25–800 mm

16. Measurement Range: 2%–100% FS, permissible error of indication better than ±0.5%

17. Resolution: 1/240,000

18. Grip Eccentricity: ≤10%

19. Testing Machine Stroke: ≥850 mm

20. UPS Power Supply (optional, additional cost): Ensures control system operation for 2 hours during power outage.

Product Features:

1. Real-time dynamic calibration function of the testing machine controller: Ensures long-term measurement accuracy of test force, displacement, and deformation.

2. Computer software with automatic alarm and error handling: Redundant backup system with control computer and data processing computer; backup computer automatically takes over if main control computer fails.

3. Ensures long-term measurement stability; test force and deformation measurement deviation shall not exceed ±0.5% over 1000 hours.

4. High resolution in force and deformation measurement (24-bit), with full-range unchanged resolution.

5. Sensor channel bandwidth up to 5 Hz, ensuring authentic and effective test data and curves.

6. Force sensors are US-made, offering high accuracy and long-term stability.

7. Large deformation extensometer is bidirectional, using high-precision grating ruler with high measurement accuracy, strong heat resistance, and anti-interference capability.

8. Testing machine controller features automatic zero adjustment and automatic calibration.

9. Multiple protection functions including overload, over-travel, over-voltage, over-current, and over-temperature.

10. Equipped with timing device; timing starts and displays when load reaches set value during test.

11. Position limit switches or alarm controls and interlock protection between various actuators.

12. Optional UPS ensures automatic maintenance of test state and alarm during sudden power outage, preventing test failure and loss.

13. Integrated control cabinet houses multiple controllers; one computer can monitor 5 or more testing machines simultaneously, with each controller operating independently without interference. (Customers can choose testing machine hosts of different capacities as needed for broader application and convenience.)

14. Equipped with SMS modem function for unattended long-term tests, periodically sending test status and corresponding data results to the operator. (Key feature)

15. The testing machine is a fully electronic creep testing machine capable of conventional creep and stress rupture tests, as well as stress relaxation tests, high-temperature short-term tensile tests, periodic loading tests (load spectrum tests), and low-cycle fatigue tests.