GPLW-10 Microcomputer Series Wire Rope Bending Fatigue Testing Machine

GPLW-10 Microcomputer Series Wire Rope Bending Fatigue Testing Machine

Product Introduction:

1. The GPLW-10 Microcomputer Series Wire Rope Bending Fatigue Testing Machine is designed to conduct fatigue life analysis tests for elevator wire ropes and stainless steel wire ropes, in accordance with standards such as GB7588-2003 "Safety Rules for the Manufacture and Installation of Elevators" and its Amendment No. 1, GB8903 "Wire Ropes for Elevators", GB/T12347 "Wire Rope Bending Fatigue Test Method", and GB/T 24478 "Elevator Traction Machines".

2. It allows preset bending fatigue cycles for the specimen. The machine will automatically stop when the specimen reaches the preset fatigue cycles or when the specimen breaks, accompanied by an alarm.

3. The wire rope specimen simulates the actual operating conditions of an elevator by passing over the test wheel (traction sheave) at a certain wrap angle under applied tension, and undergoes repeated bending at a specific frequency to evaluate its bending fatigue resistance.

5. The equipment should consist of a test wheel, guide wheel, fixed wheel, wrap angle adjustment device, display device, transmission system, force loading system, control system, and other components.

Standards:

1. GB 7588 Safety Rules for the Manufacture and Installation of Elevators

2. GB 8903 Wire Ropes for Elevators

3. GB/T 12347 Wire Rope Bending Fatigue Test Method

4. GB/T 24478 Elevator Traction Machines

Product Features: This fatigue life testing machine is specifically used for detecting the bending fatigue of elevator wire ropes. Before testing, the actual diameter of the wire rope specimen is measured without stretching. Then, it is simulated under actual elevator operating conditions by passing over the test wheel at a certain wrap angle with applied tension and repeated bending at a specific frequency. The machine stops every 50,000 cycles to check for wire rope breakage and measure the diameter until the specified number of test cycles is completed or the wire rope is damaged, thereby evaluating its bending fatigue resistance. The equipment uses a traction sheave as the test wheel, which can be replaced according to different wire rope specifications. The wrap angle, tension, and test speed of the wire rope are adjustable.

Components:

1. Main Unit: Adopts a vertical structure with a frame main body to ensure overall rigidity. The test wheel is made of high-quality alloy structural steel to guarantee service life. The tension part is achieved through electric loading.

2. Drive System: Driven by a speed control system with a wide speed adjustment range, ensuring uniform and stable loading.

3. Transmission System: Uses lever principle transmission to ensure uniform, stable, and precise transmission.

4. Display System: The machine uses photoelectric sensors to collect the cycle count of the specimen, displayed on a microcomputer monitor.

Product Parameters:

1. Test wire rope diameter range includes at least: 0.5-10mm;

2. Maximum test frequency ≥60 cycles/minute, freely adjustable within the maximum frequency range;

3. Testing machine cycle count includes at least: 0–100,000 cycles;

4. Cycle count includes at least: 0–99 cycles;

5. Cycle stop time includes at least: 0–999 minutes;

6. Should ensure uninterrupted fatigue cycles for the test wire rope specimen of at least 600,000–900,000 cycles;

7. The testing machine can freely set and display the number of fatigue cycles;

8. The testing machine has an automatic stop function when the preset cycle count is reached;

9. The testing machine has a jog function during testing.

10. Microcomputer displays force and cycle count.

Tags: GPLW-10 Microcomputer Series Wire Rope Bending Fatigue Testing Machine