Six-station tack tester

Six-Station Holding Adhesion Tester CNY-6

Product Model: CNY-6

Basic Application Scope: This product is manufactured in accordance with the national standard GB/T4851-1998, suitable for holding adhesion tests on pressure-sensitive adhesive tapes and other products.

Working Principle: The test plate with the sample attached is vertically suspended on the test frame, with a specified weight hung at the lower end. The adhesive tape's resistance to pull-off is measured by the displacement of the sample after a certain time or the time required for the sample to completely detach.

Instrument Structure: Mainly consists of a timing mechanism, test plate, loading plate, weights, frame, and standard pressure roller.

Product Features:

1. Uses a high-precision relay-controlled timer for convenient operation and economical practicality.

2. High-quality proximity switch, wear-resistant and impact-resistant, highly sensitive, with a longer service life.

3. Timer equipped with a built-in lithium battery for accurate timing and practical convenience.

Technical Specifications:

1. Standard Pressure Roller: 2000g±50g

2. Weight: 1000±10g (including loading plate weight)

3. Test Plate: 60 (L) mm × 40 (B) mm × 1.5 (D) mm

4. Timing Range: 0–9999h

5. Number of Stations: 6 units

6. Dimensions: 600 (L) mm × 240 (B) mm × 400 (H) mm

7. Net Weight: 20kg

8. Power Supply: AC 220V 50Hz

Standard Configuration: Main unit, 6 weights, 12 test plates, one standard pressure roller

National Standard: GB/T4851 "Test Method for Holding Adhesion of Pressure-Sensitive Tapes"

Tags: Six-Station Holding Adhesion Tester CNY-6