I. Equipment Overview
The flash dryer is primarily used for drying block-shaped, filter cake-shaped, powdered, and granular materials. It is a high-efficiency, energy-saving drying equipment developed by our company.
Hot air enters the drying chamber from the bottom inlet at a certain speed, generating strong shear, flotation, and rotational effects on the material. As a result, the material undergoes centrifugal force, shear, collision, and friction, leading to micronization and enhanced mass and heat transfer. At the bottom of the dryer, larger and wetter particle clusters are mechanically broken down by the agitator. Particles with lower moisture content and smaller particle size are carried upward by the rotating airflow, undergoing further drying during the ascent. Due to the rotational flow of the gas-solid phases, the inertia of the solid phase is greater than that of the gas phase, resulting in a high relative velocity between the two phases, which intensifies heat transfer. This gives the machine a high drying intensity.
II. Equipment Features
1. Multiple feeding device options available, ensuring continuous and stable feeding without bridging.
2. A special cooling device at the bottom of the dryer prevents material degradation in the high-temperature zone.
3. Special air pressure sealing and bearing cooling devices effectively extend the service life of the transmission parts.
4. A unique air distribution device reduces equipment resistance and balances wind speed within the tower.
5. The drying chamber is equipped with a grading ring and swirl plates, allowing adjustable and controllable material fineness and final moisture content.
6. High circumferential air velocity in the drying chamber shortens material residence time, effectively preventing material adhesion to the walls and degradation of heat-sensitive materials.
