CCD Full Spectrum Direct Reading Spectrometer WL15A-Pro

WL15A-Pro CCD Full Spectrum Direct Reading Spectrometer

The WL15A-Pro CCD Full Spectrum Direct Reading Spectrometer features a new design for enhanced usability. It employs a powerful new generation of spectral analysis technology, maintaining vacuum stability over extended periods to deliver more stable, accurate, and reliable measurement results. The expanded wavelength range of the Rowland grating spectrometer chamber, now 120–800 nm, provides advanced material analysis solutions for every spectrometer user.

Detector - Charge-Coupled Device - CCD

Toshiba, Sony, Hamamatsu (back-illuminated CCD and CMOS options available). The selected detectors offer high sensitivity, wide linear range, excellent reproducibility, stability, fast response speed, and predictable responses to different substances.

1. Full-frequency digital dual-pulse excitation light source: excitation frequency 100–1000 Hz;

2. Digital excitation energy adjustment; dual-spark combined discharge: ensures more stable sample excitation;

3. Argon pressure electronic sensing protection device: enhances safety and maintains constant excitation pressure;

4. Fiber-optic command transmission: enables discharge inductance and capacitance parameter settings;

5. Excitation platform: constructed entirely from wear-resistant and corrosion-resistant Cr stainless steel, equipped with an intelligent argon pressure protection device;

6. Open sample stage: accommodates larger samples for analysis;

7. Dual-gas path excitation device: utilizes horizontal and vertical gas paths for stable sample excitation;

Dual-spark combined discharge , ensures more stable and safer sample excitation, with an intelligent argon pressure protection device.

1. Paschen-Runge optical structure, vacuum Rowland circle grating spectrometer chamber;

2. Semi-submersible vacuum chamber incident lens cleaning device;

3. Micro-displacement device for the entrance slit, high-precision anti-coating entrance slit, 10 micrometers;

4. Grating: Rowland circle grating; grooves: 2400 lines/mm; focal length: 400 mm;

5. Rowland grating spectrometer chamber wavelength range: 190–1100 nm, optional full-spectrum flat-field optical system;

6. Optical chamber: ultra-thin constant-temperature integrated optical chamber, automatically maintained at 35°C with precision ±0.1°C;

1. Ultra-thin vacuum chamber: compatible with small vacuum pumps;

2. Vacuum level: controlled below 2 Pa;

3. Minimal vacuum oil contamination, molecular sieve, maintains vacuum level over extended periods;

4. Timed vacuum control, patented integrated vacuum chamber, short vacuum pump operation time;

5. Vacuum pump: equipped with anti-backflow oil device to protect the optical chamber from damage;

6. Intermittent vacuum control device: pumping for 3–5 minutes maintains vacuum for >3 hours;

Readout System

1. Power supply pre-filter circuit, FPGA digital signal controller;

2. Industrial USB data acquisition (200 kHz/s), ultra-high-speed multi-channel synchronous digital collector, 3.2 million times per second;

4. AD acquisition: 16-bit single-pixel digital-to-analog conversion;

5. Cooling device: CCD utilizes cooling for noise reduction, low noise, high sensitivity;

6. Signal transmission: fiber-optic digital encoding transmission, strong anti-interference capability;

7. Peak voltage sampling circuit, vacuum measurement circuit for the spectrometer optical chamber;

8. High-speed USB multi-channel synchronous data acquisition using ARM chip, 16*100k synchronous sampling.

Analysis Software

1. Runs fully Chinese analysis software under Windows system, with multi-language version switching available as needed. Automatic setup of analysis parameters, excitation, rinsing, and pre-ignition exposure time selection.

2. Automatic data acquisition, automatic fitting of working curves using the least squares principle.

3. Automatic two-point or single-point standardization of analysis curves.

4. Automatic control sample correction; one analysis curve can be corrected with single or multiple control samples.

5. Output options: intensity, intensity ratio, concentration, corrected concentration.

6. Repeat one or multiple excitations at the same point, delete one or multiple excitation results.

7. Automatic calculation of average, SD, and RSD.

8. Automatic correction for inter-element interference and background.

9. Shared standard material library.

10. Test results can be printed, saved to disk; print formats can be customized or exported to Word documents for storage.

11. Test results can be transmitted remotely via network and computer standard ports.