ASTM E1333, EN 717-1, ASTM D6007 formaldehyde and VOC full-scale emission chamber testing for formaldehyde and volatile organic compounds.
Contact Info
- Add:东莞市大朗镇富民南路68号一栋, Zip:
- Contact: 黎冠
- Tel:13790591691
- Email:darrenli@stc.group
Other Products
One-Stop Testing, Globally Accepted
Dongguan Biaoji Product Testing Co., Ltd.
Dongguan Biaoji Introduces Domestic VOC Testing Chamber: Dongguan Biaoji's Textile, Furniture, and Material Testing Department has introduced a full-scale VOC testing chamber with a capacity of 24 cubic meters, currently the only one in China that meets international standards. It can test formaldehyde and other volatile organic compounds in wood products, furniture, artificial boards, and building materials according to product safety standards from Europe, the United States, Japan, China, and other regions, greatly meeting the testing needs of manufacturers in Dongguan and the Pearl River Delta.
Furniture, Boards (Fiberboard, Particleboard, Plywood, Blockboard, etc., and Their Products) VOC and Formaldehyde Full-Scale Emission Chamber Testing Requirements and Standards:
Formaldehyde/VOC Full-Scale Emission Chamber Testing Requirements | ||||||
Test Item | Test Standard | Pre-Test Sample Treatment | Applicable Samples | Sample Requirements (Size or Weight) | Testing Cycle | Remarks |
VOC | ASTM D6670 | At least 2 days | Indoor (building, furniture, etc.) materials and products |
| At least 7 working days | Samples wrapped in polyethylene plastic film (at least 0.15mm thick) or sheets of the same material |
ISO 16000-9 | Not required | Furniture, building products | Entire sample | At least 7 working days (testing time 3–28 days) | Send for testing as soon as possible after production; Sampling: Rolled samples: Remove at least 1 meter from the edge or sample from the outer layer and wrap. Flat boards: Seal in original packaging. Sealing: Wrap in aluminum foil, then pack and seal in polyethylene bags; or seal in polyethylene-aluminum composite bags; or seal in polyvinyl fluoride bags. Packaging time should not exceed 1 hour; send for testing promptly after packaging. | |
BIFMA X7.1 | Directly in the emission chamber, placed under test conditions for 3 days | Office furniture, seating | Entire sample | 8 working days (if special requirements extend testing time to 14 days, the cycle becomes 15 days) | Samples must be sent for testing within 15 days of production; Sample treatment options: 1. Wrap (e.g., double-layer aluminum foil), then pack and seal in polyethylene bags; 2. Pack and seal in polyester film bags or polyvinyl fluoride bags; Sample sealing must be completed within 24 hours of production. | |
Formaldehyde | ASTM E1333 | 7 days ± 3 hours | Artificial boards and their products | Boards: 1. Hardwood plywood wall panels: 1.5m x 1.9m x 4 pieces; 2. Particleboard, industrial particleboard, industrial hardwood plywood: 1.5m x 1.72m x 2 pieces; 3. Medium-density fiberboard: 1.5m x 1.04m x 2 pieces; Low-density door core boards: 1.56m x 1.04m x 2 pieces. If only one side of the sample is exposed to air, calculate as single-sided (test two boards together, doubling the sample quantity). Or finished products, such as entire furniture, cabinets, etc. | At least 10 working days | Sample surface area calculated as length x width, double-sided; if only one side is exposed, calculate as single-sided (test two boards together). Testing continues until stable emission is reached. Samples wrapped in polyethylene plastic film (at least 0.15mm thick) or sheets of the same material. |
EN 717-1 | Not required | Artificial boards and products | 1.5m x 1.0m x 4 pieces | Testing time 10–28 days | ||
STC issues reports, authoritative and impartial, globally recognized, with excellent prices!! One-stop testing, globally accepted.
| Industry Category | Business-Services |
|---|---|
| Product Category | |
| Brand: | STC |
| Spec: | ASTMD6670,ISO16000-9,BIFMA X7.1,ASTM E1333,EN717-1,ASTM D6007 |
| Stock: | 1000 |
| Manufacturer: | |
| Origin: | China / Guangdong / Dongshi |
