Cloth Knurling and Edge-Cutting Machine, Headwear Flower Clip Accessories One-Step Forming Machine

I. Working Principle

The fabric knurling and edge-cutting machine for headwear, floral clips, and accessories is primarily composed of an ultrasonic generator, vibration system, mold, and embossing worktable. The ultrasonic generator serves as the source of ultrasonic vibration, converting electrical energy into mechanical vibration energy through a power supply and transmitting it to the vibration system. The vibration system consists of a transducer, vibration block, and vibration hole, and its function is to convert electrical energy into mechanical vibration energy with high frequency and small amplitude. The mold is a key component of the embossing process, featuring the desired patterns and designs on its surface, and transmits ultrasonic vibrations to the workpiece surface via the vibration system. The embossing worktable is the platform where the workpiece is placed, and continuous embossing of the workpiece is achieved by controlling the movement and rotation of the worktable.

II. Product Features

Short Welding Time: Ultrasonic automatic stitching eliminates the need for needles and threads, saving the trouble of frequent needle and thread changes. The stitching speed is 5 to 10 times faster than needle-based quilting.

Safe and Eco-Friendly: As no needles are used, the risk of broken needles remaining in the material during stitching is avoided, making it a new generation of safe and environmentally friendly products.

Strong Adhesion: There is no thread breakage or seams as in traditional stitching. The embossed patterns are clear, and the surface has a more three-dimensional浮雕 effect, making the product appear more high-end and aesthetically pleasing.

Excellent Waterproofing: The finished product has no needle holes and does not leak water, providing better waterproofing and warmth retention.

High Level of Intelligence: The machine is highly automated and intelligent, equipped with an infrared automatic edge alignment system that automatically corrects the alignment of multiple layers of material, ensuring that the upper and lower materials remain aligned during stitching. This results in low processing waste and a more平整 and stable product.

III. Application Areas

The fabric knurling and edge-cutting machine for headwear, floral clips, and accessories is widely used in industries such as textiles, plastics, leather, and ceramics for pattern embossing and design processing. In the Christmas decoration industry, it can be used to produce various patterned Christmas trees, Christmas stockings, Christmas hats, and other accessories, enhancing the aesthetic appeal and added value of the products.

IV. Operating Procedures

Confirm the installation position and method of the embossing mold, and check whether the screws are tightened.

Inspect the surface of the embossing mold to ensure it is clean and free of debris.

Verify that the position and layout of the material are reasonable to prevent damage during operation.

Ensure that the power supply of the ultrasonic embossing machine is connected and the voltage is normal.

Place the material to be embossed on the worktable and ensure it is laid flat.

Turn on the power switch of the ultrasonic embossing machine and adjust the output frequency and amplitude of the ultrasonic generator.

Adjust the position of the embossing mold so that it aligns precisely with the area to be embossed, then press the embossing mold down.

Press the embossing button to start the embossing process.

After embossing is complete, press the lift button to raise the embossing mold and remove the material.

The above is a detailed introduction to the ultrasonic embossing machine, fabric angel wing embossing machine, and toy accessory knurling machine, including its working principle, product features, application areas, and operating procedures.