Coal Mine Support Mesh Welding Machine

This equipment is primarily used for producing mesh for coal mine support and construction mesh. 

Feeding method: The required length of warp and weft wires are pre-cut using an automatic straightening and cutting machine. The warp wires are manually placed at the corresponding wire threading mold, while the weft wires are placed in the material chute and automatically fed by a servo motor; 

Welding: The main machine starts welding. It adopts synchronous control technology, with sub-control welding and welding time both controlled by a PLC digital programming system. The aperture size can be adjusted directly by inputting values on the touchscreen control panel; welding is completed by spring pressure. 

After welding: The servo motor controls automatic mesh pulling until the entire piece is welded, then activates the automatic mesh connecting and discharging system; the next piece begins welding. 

 Technical Parameters 

 Welding wire diameter: 4mm-8mm 

Warp wire feeding: Pre-cut wire 

Weft wire spacing: Minimum 50mm 

Weft wire feeding: Pre-cut wire 

Warp wire spacing: 100mm-300mm 

Power supply: AC380V

Number of warp wires: 26 

Welding width: 2500mm 

Mesh length: 6-12 meters 

Welding speed: 45 times/minute 

Overall dimensions: 10*3.4*1.6 (m) 

 All the above parameters can be customized according to customer requirements. 

Our company provides the technical documentation required for equipment installation and dispatches technical personnel to guide the installation and debugging process. We are responsible for training users in equipment operation, maintenance, and other aspects. 

Company Name: Shenzhou Longshun Wire Mesh Machinery Co., Ltd.
Contact Person: Manager Wen
Contact Number: 15373737477 (same for WeChat)
Website: http://www.hslongshunjx.com

Company Address: Bingcao Industrial Zone, Shenzhou, Hebei