Box-type resistance furnace integrated programmable high-temperature furnace SXC-3-10

The integrated programmable high-temperature furnace, also known as the integrated programmable box-type electric furnace or integrated programmed muffle furnace, features a ceramic fiber inner chamber and high-temperature heating wires for energy efficiency and high performance. Its energy consumption is only one-third that of ordinary high-temperature furnaces, with rapid heating capability. The outer shell is made of cold-rolled steel with spray coating, offering a lightweight design and weighing only one-fifth of conventional high-temperature furnaces.

The control system utilizes a fully automatic multi-band LTDE programmable instrument with adjustable heating rates. The PID + SSR system ensures synchronous and coordinated control, enabling consistency and reproducibility for any test or experiment. It includes automatic constant temperature and time control functions, along with secondary over-temperature protection for reliable and safe operation. The control instrument is located below the chamber, integrated into the unit. Electrical connections between the furnace body and temperature controller are completed before shipment, allowing for immediate use upon power connection. It is an ideal high-temperature furnace for universities, research institutions, industrial and mining enterprises, and laboratories.

Detailed Specifications:

I. Product Technical Parameters

1.1 Temperature Range: 100 ~ 1000°C

1.2 Temperature Fluctuation: ±1°C

1.3 Display Accuracy: 1°C

1.4 Chamber Dimensions: 300×200×150MM (9L)

1.5 Overall Dimensions: 540×360×525MM

1.6 Heating Rate: ≤30°C/min (adjustable to any rate below 30°C per minute)

1.7 Total Power: 3KW

1.8 Power Supply: 220V, 50Hz

II. Temperature Control System

2.1 Temperature Measurement: K-type nickel-chromium/nickel-silicon thermocouple

2.2 Control System: LTDE fully automatic programmable instrument, PID adjustment, display accuracy 1°C

2.3 Electrical Components: Brand contactors and solid-state relays

2.4 Time Control: Programmable heating time and constant temperature time control; automatic shutdown upon reaching set time

2.5 Over-Temperature Protection: Built-in secondary over-temperature protection device for dual safety

2.6 Operation Mode: Fully adjustable constant temperature operation; programmable operation

III. Furnace Structure and Materials

3.1 Shell Material: Outer casing made of high-quality cold-rolled steel treated with phosphate film salt and high-temperature spray coating, in computer gray color

3.2 Chamber Material: Constructed with high-radiation, low-thermal-mass ultra-lightweight fiber panels assembled on six sides, resistant to rapid cooling and heating, energy-efficient and high-performance

3.3 Insulation Method: Air cooling

3.4 Thermocouple Port: Thermocouple enters from the upper rear of the furnace body

3.5 Terminal Blocks: Heating wire terminals located at the lower rear of the furnace body

3.6 Controller: Positioned below the furnace body, with built-in control system and compensation wires connected to the furnace

3.7 Heating Element: High-temperature resistance wire

3.8 Total Weight: Approximately 35KG

3.9 Standard Packaging: Wooden case

IV. Included Technical Documentation and Accessories

4.1 Operation Manual

4.2 Product Warranty Card

V. After-Sales Service

5.1 Remote technical guidance for users

5.2 Timely provision of spare parts and accessories

5.3 Technical consultation and support during equipment operation

5.4 Immediate response within 8 working hours upon receiving customer fault notification

VI. Main Components

LTDE Programmable Control Instrument

Solid-State Relay

Intermediate Relay

Thermocouple

High-Temperature Heating Wire