Investment in solar power stations for distributed photovoltaic power generation and solar carports.

Daily Maintenance of Distributed Photovoltaic Modules

     Photovoltaic power generation modules have a small installation tilt angle, poor self-cleaning ability, and are prone to dust accumulation, which significantly affects the system's power generation capacity. Therefore, it is recommended that after the project is completed and put into operation, this task should be treated as a key focus in operation and maintenance.

Recommended Module Cleaning Plan

1) Cleaning Methods

A) Water Rinsing (Neutral Water)

     The first step is to use water rinsing. Due to the large surface area, the workload for cleaning and maintaining the module surfaces is substantial. Therefore, it is recommended to set up water supply devices (faucets and matching hoses) by sub-areas. During cleaning, each sub-array can be addressed individually. The advantage of this method is that when dust is present, cleaning can be performed independently, with convenient operation and high efficiency.

Manual Cleaning

     When oily dust particles in the air adhere to the module surfaces, they are not easily removed, and water rinsing may not be effective. Therefore, it is recommended to monitor and inspect the module surfaces during system operation and maintenance. If there are areas that remain unclean after water rinsing, this method should be used for supplementary cleaning.

Required Tools: Extended mop (recommended to use pure cotton products), neutral degreaser

Cleaning Method:

    Operate manually using maintenance access paths. Self-made extended specialized cleaning tools can be used for cleaning. Use a cleaning solution mixed with detergent to ensure oil stains are removed, followed by another round of water rinsing.

2) Maintenance Cycle

To ensure the cleanliness of the module surfaces, considering the installation method of this project and its urban location, it is recommended to set the water rinsing cycle to three times per month. Additionally, an inspection should be conducted at least once a month to determine the need for timely cleaning based on the level of dust accumulation.

Note: It is recommended to clean the modules in the summer during the early morning or evening when temperatures are lower. In winter, clean the modules in the afternoon when temperatures are higher.

Company Name: Jiangsu Mangzhong Construction Co., Ltd.

Business Scope: EPC for photovoltaic power stations and investment in solar power stations

Company Landline: 025-5888 3737

Mobile Number: 159 5163 4545

Company Website: http://www.mangz.cn