Cold-drawn seamless steel pipe heading high-frequency heating electric furnaceHenan cold-drawn seamless steel pipe heading high-frequency heating electric furnace, heading electric heating furnace supplier (15838311591), widely used in the heading process of cold-drawn special-shaped steel (round steel, square steel, seamless steel pipe), replacing coke furnace heating, and substituting gas and oil furnace heating methods. Cases and videos are available; welcome to call for details. Currently, the company has hundreds of devices in service in this industry, with outstanding applications in Wuxi, Changzhou, and Hangzhou. Parameters of the cold-drawn seamless steel pipe heading induction heating equipment are as follows:1. Power supply voltage: 380V~440V 50HZ2. Model: YFL-80 YFL-120
YFL-1603. Frequency range: 15~30KHZCurrently, most manufacturers in the cold drawing industry use primitive heating methods such as coal, coke, or kerosene furnaces for locally heating the ends of cold-drawn steel. These heating methods have the following disadvantages:1. Slow heating speed;2. Severe workshop environmental pollution;3. High production costs and low production efficiency;4. Small output and high labor intensity for workers;Cost comparison with gas/oil furnaces and coke furnace heating: For example, a cold-drawn steel plant in Hangzhou originally used an oil furnace for heating, with a maximum daily output of 50 tons of round steel. After switching to our company's Model 160 heating machine, the output increased to 90 tons, and the number of workers was reduced to two.The processing cost per ton for workers decreased from the original 20 yuan/ton to 13 yuan/ton, and the heating cost per ton decreased by 15 yuan. In total, processing one ton saves 23 yuan, and the workers' labor intensity is also reduced. The plant uses four of our company's Model 160 heating machines, with a monthly output of 10,000 tons, saving over 200,000 yuan per month. The equipment investment can be recovered in one and a half months. It is now recommended to use our company's new induction heating equipment for induction heating and necking of cold-drawn steel (seamless steel pipes, round steel, square steel, flat steel, and hexagonal steel). The heating temperature exceeds 800°C, and one piece can be heated in a few seconds. Moreover, the core components of the equipment circuit use German module IGBT, which is energy-saving and effectively reduces costs. Additionally, it improves production efficiency and produces no pollutants. It has been successfully applied in Changzhou, Wuxi, and Hangzhou, representing a new application developed by our company, leading the way ahead of other companies. It is recommended to use ultra-audio frequency electric furnaces with power ratings of 80KW, 100KW, and 160KW for heating headings (capable of heating various steel headings within 150*150mm) to smoothly pass through cold-drawn carbide dies. The cold-drawn steel has a smooth surface, saves significant material costs, and has relatively high strength.
Contact number: 15838311591, welcome to call for consultation!
