Subway station hall escape embedded luminous stainless steel landmark

The subway photoluminescent evacuation signage system manufactured by our company absorbs visible light for 5-10 minutes and can continuously emit light in darkness for over 12 hours. The luminescent effect has no half-life and can be recycled for more than 30 years. It requires no replacement unless manually damaged, offering a permanent solution. In emergencies such as power outages or fires in underground rail transit, it effectively guides crowd evacuation.

With the rapid development of underground rail transit in recent years, the use of stainless steel products has become more widespread in meeting fire evacuation signage requirements;



1. Utilizes national standard 3mm-7mm SUS304 or higher stainless steel, formed through high-temperature, high-pressure metallurgical processing. Surface graphics are corrosion-sunk, with long-afterglow photoluminescent pigments filled on the reverse side.


2. The photoluminescent material employs high-brightness long-afterglow luminescent pigments, requiring low excitation light intensity. Any light source can serve as an excitation source. Even when surface illumination disappears or diminishes, it can store and self-illuminate for over 8 hours. Its self-illuminating brightness must meet the following requirements:
Appearance: Light yellow powder

Luminescent color: Yellow-green light

Main peak wavelength of luminescence: 520nm;

Excitation light wavelength range: 200-450nm. Its self-illuminating brightness should meet the following requirements:

5min brightness ≥815mcd/㎡

20min brightness ≥190mcd/㎡

60min brightness ≥60mcd/㎡



3. The surface of the signage must meet a rating of no less than Grade 0 as per GB/T1766-1999 requirements.



4. The photoluminescent fire safety evacuation signage must comply with national testing standards for weather resistance, color adhesion, corrosion resistance, impact resistance, water resistance, and radioactivity.