Water-cooled heating and cooling unit

Water Cooling and Heating Unit

Introduction

Water Constant Temperature - Water Cooling and Heating Unit, the heating method utilizes heat from the air to warm the water, eliminating the need for additional heating elements. In this era of environmental conservation and energy efficiency, this unit fully meets market demands..

Unit Cooling Principle

The compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gaseous refrigerant, which enters the condenser. Part of the heat from the refrigerant inside the condenser is expelled by external cooling water or cooling fans. The refrigerant releases heat and liquefies into a high-temperature, high-pressure liquid, which then flows through a dryer filter for drying and filtration. It then enters the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant temperature remains constant while its volume changes. After absorbing heat, the low-pressure hydraulic refrigerant vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. It is compressed into a high-temperature, high-pressure gas and enters the condenser, thus completing the entire refrigeration cycle.

Unit Heating Principle

Based on the refrigeration principle, the compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gas, which passes through a four-way valve and a liquid storage tank. The refrigerant enters the condenser, where its heat is utilized to heat the water tank, with heated water reaching up to 90 degrees Celsius. The refrigerant releases heat and liquefies into a high-temperature, high-pressure liquid, which then flows through a dryer filter for drying and filtration. It enters the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant temperature remains constant while its volume changes. After absorbing heat, the low-pressure hydraulic refrigerant vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. It is compressed into a high-temperature, high-pressure gas and enters the condenser, thus completing the entire heating cycle.

Features

The Water Cooling and Heating Unit has eight major protection devices:1. Phase loss and reverse phase protection device; 2. Motor overload protection device; 3. High and low pressure protection device; 4. Automatic water shortage alarm device; 5. Low temperature and anti-freezing protection device; 6. Coil overheating protection device; 7. Insufficient water flow protection device; 8. Fully automatic temperature control system

Unit Performance

The unit is entirely manufactured using original components supplied by reputable brands recognized in the market, ensuring stable performance and continuous operation of this series.

Control System

1. Control components, microcomputer boards, single modules, PLCs, etc., use market-recognized brands such as LG, Bangpu, Siemens, Schneider, and Mitsubishi.

2. To enhance the stability and safety of the Water Cooling and Heating Unit during use, the EU quality management system certification has been actively implemented during production and processing. Quality control is rigorously managed in supplier selection, and load specifications are strictly adhered to. The unit's performance includes additional protection devices such as phase loss and reverse phase protection, motor overload protection, high and low pressure protection, automatic water shortage alarm, and low temperature and anti-freezing protection.

After-Sales Service

1.One year free warranty, lifetime maintenance (excluding human factors, consumables, and force majeure),

2.Upon receiving the customer's written equipment repair notice, response and on-site repair within 36 hours in Guangdong Province, and 72 hours response and on-site repair outside Guangdong Province.

3.After the warranty period, a separate service agreement can be arranged to ensure effective support during the customer's production process.

4.During the warranty period, if equipment failure is caused by product quality (excluding human factors), all costs will be borne by our company.

5.Outside the warranty period, costs incurred for equipment maintenance will be charged based on actual expenses.

Unit Technical ParametersAir energy water refrigeration heating machine set Technical Parameters