Air to Water Heating and Cooling System

Air Energy Water Cooling and Heating System

Introduction

Constant Water Temperature – Air Energy Water Cooling and Heating System. The heating method utilizes heat from the air to warm the water, eliminating the need for additional heating elements. In this era of environmental protection and energy conservation, this unit is fully capable of meeting market demands.

Cooling Principle of the Unit

The compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gaseous refrigerant, which enters the condenser. Part of the heat from the refrigerant inside the condenser is expelled by external cooling water or cooling fans. After releasing heat, the refrigerant liquefies into a high-temperature, high-pressure liquid and flows out. It then passes through a dryer filter for drying and filtration before entering the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant's temperature remains unchanged while its volume changes. After absorbing heat, the low-pressure hydraulic refrigerant vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. It is compressed into a high-temperature, high-pressure gaseous state and enters the condenser, thereby completing the entire refrigeration cycle.

Heating Principle of the Unit

Based on the cooling principle, the compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gaseous refrigerant, which passes through a four-way valve and a liquid storage tank. The refrigerant then enters the condenser, where its heat is utilized to heat the water tank. The heated water can reach up to 90 degrees Celsius. After releasing heat, the refrigerant liquefies into a high-temperature, high-pressure liquid and flows out. It passes through a dryer filter for drying and filtration before entering the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant's temperature remains unchanged while its volume changes. After absorbing heat, the low-pressure hydraulic refrigerant vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. It is compressed into a high-temperature, high-pressure gaseous state and enters the condenser, thereby completing the entire heating cycle.

Features

The Air Energy Water Cooling and Heating System includes eight major protection devices:1. Phase loss and reverse phase protection device; 2. Motor overload protection device; 3. High and low pressure protection device; 4. Automatic water shortage alarm device; 5. Low temperature and anti-freezing protection device; 6. Coil overheating protection device; 7. Insufficient water flow protection device; 8. Fully automatic temperature control system

Unit Performance

The unit is entirely manufactured using original components supplied by reputable brands recognized in the market, ensuring stable performance and continuous operation of this series of models.

Control System

1. Control components, microcomputer boards, single modules, PLCs, etc., use market-recognized brands such as LG, Bangpu, Siemens, Schneider, and Mitsubishi.

2. To enhance the stability and safety of the Air Energy Water Cooling and Heating System during use, the EU quality management system certification has been actively implemented in the production process. The selection of suppliers is carefully managed to ensure product quality, and strict standards are applied to load requirements. The unit's performance includes additional protection devices such as phase loss and reverse phase protection, motor overload protection, high and low pressure protection, automatic water shortage alarm, low temperature and anti-freezing protection.

After-Sales Service

1.One year free warranty, lifetime maintenance (excluding human factors, wear parts, and force majeure).

2.Upon receiving the customer's written equipment repair notice, response and on-site repair within 36 hours in Guangdong Province, and within 72 hours outside Guangdong Province.

3.After the warranty period, a separate service agreement can be arranged to ensure effective support during the customer's production process.

4.During the warranty period, if equipment failure is caused by product quality (excluding human factors), all costs will be borne by our company.

5.Outside the warranty period, costs incurred for equipment maintenance will be charged based on actual expenses.

Unit Technical ParametersAir energy water refrigeration heating machine set Technical Parameters

3

25

360×80×190

Note: 1. Refrigeration compressor: Maximum operating temperature 45°C, refrigerant used is R22. Refrigeration compressor: Support highest temperature  45 ℃、Refrigerant R22 for use.

2. Screw unit energy automatic control is 75%-50%-25%. Screw water chillers energy automatic control for 75%-50%-25%.

3. Evaporation temperature inlet water 12°C, evaporation temperature outlet water 7°C. Condensation temperature inlet water 30°C, condensation temperature outlet water 35°C. Evaporation temperature into the water 12 ℃、Evaporation temperature water 7 ℃、Cooling water temperature into 30 、Cooling water temperature for 35.

4. The above parameters are subject to change without prior notice. The above parameters are subject to change without prior notice.